Arda HAS92D900MM User Manual

Loading ...

We do the utmost to ensure that the provided informaon is complete and accurate; however, images and

specicaons are subject to change without noce. Visit our website at www.ardaappliances.com

for the latest version of this manual.

- 14 -



1. Allow the bulb to cool for 10 minutes; remove the grease lter for easy access.

2. Carefully unscrew the bulb to avoid glass breakage. Ensure that the replacement bulb has the

same voltage and waage specicaon as the old bulb. Install new bulb in the light xture by

screwing it into the xture socket.

3. Replace the grease lter.









1. Disconnect the power source from the hood by unplugging the power cord or turning o the

circuit breaker. Allow the bulb to cool for 10 minutes before removing it from the light xture.

2. Place a small athead screwdriver under the outer lip of the xture (A). With some models it is

also possible to remove the grease lter and press the light xture out of its mounng bracket from

inside the hood (B). Avoid touching the wires when pressing the xture out. Holding both ends of

the plug (do not hold wires) press down the locking lever (to unlatch the locking pin) and gently pull

the two secons apart.

3. Remove the cover on the xture, by placing a small athead screwdriver between the inner and

outer ring of the xture in the area marked “OPEN,” and pry loose the inner ring (C).

Using a dry paper towel, pull out the old bulb and discard. Hold the new halogen bulb with a dry

paper towel between your ngers. The paper towel prevents oils from your skin from adhering to

the glass of the bulb. Align the pins of the bulb with the holes in the xture and gently push the

bulb straight in unl fully inserted.

4. Replace the cover on the xture by aligning the three slots on the cover with the matching slots

on the xture and pressing rmly on the outer metal ring of the cover. To avoid breakage, do not

press on the glass.

5. To reconnect the plug line up the

ends (square hole with square peg) and

gently press together unl they lock.

Snap the light xture back into its socket

by pressing the outer ring of the xture.

Do not press on the glass.

6. Reconnect the power to the hood.



Loading ...

Arda HAS92D900MM 36 Inch Stainless Steel Convertible Chimney Style Wall Mount Hood