HAS92D900MM User Manual

Loading ...

We do the utmost to ensure that the provided informaon is complete and accurate; however, images and

specicaons are subject to change without noce. Visit our website at www.ardaappliances.com

for the latest version of this manual.

- 11 -



1. Aach 6” aluminum duct (not included) to the prepared duct

work in the ceiling. Seal all seams. If using the recirculaon kit

(not provided), the air deector is installed at this step. Please

see instrucons provided with kit.

2. Carefully separate the telescopic chimney duct pieces.

3. Aach the inner piece of the decorave chimney to the top of

the cage with screws provided (Fig. 17).

4. Slide the outer piece of the decorave chimney on to the cage

over the inner chimney and temporarily hold in place with two

screws.







1. Before mounng the hood, plug the unit in and test all

funcons for proper operaon:

a. Blower works at all speeds.

b. Lights turn on and o.

c. When blower is on, the damper aps open.

2. Remove grease lters from range hood.

3. With the assistance of two other people liing the hood from

below, raise the unit unl the lower cage sits inside the range

hood lower cage. Be sure the unit is installed with the controls

facing front. Screw hood to cage (Fig. 18).

4. Aach 6” aluminum duct to the hood duct connector. Ensure

that the damper aps are free to open. Seal all seams.

5. Plug in the unit.

6. Remove temporary screws holding the lower decorave chimney piece in place.

7. Re-install the grease lters and remove protecve plasc wrap from the hood.

Fig.17



Fig.18

Loading ...

Arda HAS92D900MM 36 Inch Stainless Steel Convertible Chimney Style Wall Mount Hood