Loading ...
Loading ...
Loading ...
Safety is a combination of using common sense, staying
alert, and knowing how your drill press works. Read this
manual to understand this drill press and how to use
it safely.
GENERAL SAFETY IMFORMATION
SPECIFIC SAFETY RULES
GENERAL SAFETY RULES
WORK AREA
• Keep children away. Do not let visitors contact tool or
extension cord. All visitors should be kept at a safe distance
from work area.
• Keep work areas clean. Cluttered areas and benches
invite accidents.
• Make workshop childproof. With padlocks, master
switches, or by removing starter keys.
• Avoid dangerous environments. Don’t use power tools
in damp or wet locations. Keep work area well lit. Do not
expose power tools to rain. Do not use the tool in
the presence of ammable liquids or gases.
PERSONAL SAFETY
• Know your power tool. Read and understand the owner’s
manual and labels afxed to the tool. Learn the tool's uses
and limitations as well as the specic potential hazards
particular to this tool.
• Don’t overreach. Keep proper footing and balance at all
times.
• Stay alert. Watch what you are doing. Use common sense.
Do not operate tool when you are tired. Do not operate
while taking medication or while using alcohol or other
drugs.
• Wear proper apparel. Do not wear lose clothing, gloves,
neckties, rings, bracelets or other jewelry that may get
caught in moving parts. Nonslip footwear is recommended.
Wear protective hair covering to contain long hair.
• Always use safety glasses. Also use face or dust mask
if cutting operation is dusty, and ear plugs during extended
periods of operation. Everyday eyeglasses have only
impact-resistant lenses, they are NOT safety glasses.
• Guard against electric shock. Prevent body contact with
grounded surfaces. For example: pipes, radiators, ranges,
refrigerator enclosures.
• Disconnect tools from power source, when not in use,
before servicing, when changing blades, bits, cutters, etc.
• Keep guards in place, in working order, and in proper
adjustment and alignment.
• Remove adjusting keys and wrenches when not in use,
before servicing and when changing blades, bits, cutters,
etc.
• Reduce the risk of unintentional starting. Make sure the
switch is in the “Off” position before plugging in the tool.
• Ground all tools. This tool is equipped with an approved
three conductor cord and a three prong grounding-type
plug to t the proper grounding-type receptacle. The green
conductor in the cord is the grounding wire. Never connect
the green wire to a live terminal.
• Never stand on tool or its stand. Serious injury could
occur if the tool is tipped or if the cutting tool is accidentally
contacted. Do not store materials on or near the tool such
that it is necessary to stand on the tool or its stand
to reach them.
• Check damaged parts. Before further use of the tool, a
guard or other part that is damaged should be carefully
checked to ensure that it will operate properly and perform
its intended function. Check for alignment of moving parts,
mounting and any other conditions that may affect the
tool's operation. A guard or other part that is damaged
should be properly replaced.
SAFETY INSTRUCTIONS
TOOL USE
• Don’t force tool. It will do the job better and safer at the
rate for which it was designed.
Page 4
WARNING: Read and understand all instructions.
Failure to follow all instructions listed below, may result in
electric shock, re and/or serious personal injury. Save all
warnings and instructions for future reference.
WARNING: For your own safety, do not try to use
your drill press or plug it in until it is completely assembled
and installed according to the instructions, and until you
have read and understood this instruction manual.
WARNING:
• All repairs, electrical or mechanical, should be attempted
only by trained technicians.
• Use only identical replacement parts. Any others may
create a hazard.
• The use of any other accessories may create a hazard.
WARNING: To avoid the risk of personal injury,
do not modify this power tool or use accessories not
recommended to t your tool.
CAUTION: Always follow proper operating
procedures as dened in this manual — even if you
are familiar with use of this or similar tools. Remember that
being careless for even a fraction of a second can result in
severe personal injury.
Loading ...
Loading ...
Loading ...