Loading ...
Loading ...
Loading ...
Air Conditioner Use
15
This section explains proper air conditioner operation.
Operating your air conditioner properly helps you to obtain the
best possible results.
If you turn off the air conditioner, wait at least 3 minutes
before turning it back on. This prevents the air conditioner
from blowing a fuse or tripping a circuit breaker.
Do not try to operate your air conditioner in the cooling mode
when outside temperature is below 65°F (18°C). The inside
evaporator coil will freeze up, and the air conditioner will
operate properly.
StartingYourAirConditioner—
DigitalControl
IMPOR TANT:
Power Pad
Lights next to the touch pads on the air conditioner control
panel indicate the selected settings.
Controls
NOTE: In the event of a power failure, your air conditioner will
operate at the previous settings when the power is restored.
set
Filter check
Temp/Time
Timer
Med
Low
Dry
Fan Only
Mode
Speed
POWER
Cool Auto
Energy Saver
High
Fan
Air Conditioner Controls
Light indicates the unit
is in the temperature or
delay time Set mode.
Mode Pad
Display
/ button
Press this button can turn on or turn off air condi-
tioner.
NOTE: Press this button to turn on air conditioner,
Press this button can select your required fan
speed in turn. Corresponding speed indicator will
be on.
Press this button can your required operation
mode in turn. Corresponding indicator will be on.
Under temperature setting status, after each press
-
ing of “ ” or “ ” button,
temperature will increase or decrease 1°F.Tem
setting range: 61-86°F.
Under timer setting status, after each pressing of
“ ” or “ ” button, time will increase or decrease
0.5h or 1h.
Under ON status without timer setting, the oper-
ation mode is Auto, Cool, Energy Saver or Dry
mode, and the set temperature will be dis-
played.
Dry
Cool
Auto
Fan
Only
Energy
Saver
Auto
Under this mode, the unit will operate automatically
according to ex-factory setting. In this case, set
temperature cannot be adjusted.
Low Med High
Auto:
Cool:
Under this mode, air conditioner operates under
cooling mode. Cooling indicator will be on. Press
“Fan Speed” button can adjust the fan speed.
Energy Save:
Under this mode, air conditioner operates under
SE mode. SE indicator will be on. Press “Fan
Speed” button can adjust the fan speed.
Under this mode, the unit runs in low fan speed for
Dry:
Fan Only:
1.
Fan Speed Pads
Under this mode, air conditioner will not cool or
heat, only blow wind. Fan indicator will be on.
Press “Fan Speed” button can adjust the fan
speed.
2.
3. Time will be displayed under timer setting or
timer preview.
Under ON status without timer setting, the oper-
ation mode is fan mode and the ambient tem-
perature will be displayed.
the unit will operate in Energy Save mode; if the
unit is energized after power failure, the unit will
still operate according to the status before power
failure.
Loading ...
Loading ...
Loading ...