Loading ...
Loading ...
Loading ...
Operating
Instructions
Page 13
To operate on Dry mode:
In this mode, the air conditioner will
generally function as a dehumidifier. Since
the conditioned space is a closed or sealed
area, some degree of cooling will occur.
TIMER: AUTO START/STOP FEATURE:
• When the unit is on or o, first press the
Timer button. The TIMER ON indicator
light illuminates indicating the Auto
Start program has initiated.
• When the time of TIMER ON is
displayed, press the Timer button
again. The TIMER OFF indicator light
illuminates. It indicates the Auto Stop
program has initiated.
• Press or hold the UP or DOWN button
to change the Auto time by 0.5 hour
increments, up to 10 hours, then at
1 hour increments up to 24 hours.
The control will count down the time
remaining until start.
• The selected time will register in
5 seconds, and the system will
automatically revert back to display the
previous temperature setting or room
temperature when the unit is on. (when
the unit is o, there is no display.)
• Turning the unit ON or OFF at any time
or adjusting the timer setting to 0.0
will cancel the Auto Start/Stop timed
program.
• If setting ON 0.5 and OFF 1 at the same
time, the unit will be activated in 0.5
hour, operates for 0.5 hour and then
stops.
Displays:
Displays
Shows the set temperature in “°C” or “°F”
and the Auto-timer settings. While on Fan
Only mode, it shows the room temperature.
Error codes:
AS - Room temperature sensor error -
Unplug the unit and plug it back
in. If error repeats, call for service.
NOTE: In Fan only mode, if the room
temperature too low or too high, it
will display “LO” or “HI”
ES - Evaporator temperature sensor error
- Unplug the unit and plug it back in.
If error repeats, call for service.
NOTICE
If the unit shuts o unexpectedly due to
the power outage, it will restart with the
previous function setting automatically
when the power resumes.
Loading ...
Loading ...
Loading ...