Loading ...
Loading ...
Loading ...
Operating
Instructions
Page 12
SLEEP FEATURE:
Press Sleep button to initiate the
sleep mode. In this mode the selected
temperature will increase by 2°F/1 (or 2)°C
30 minutes after the mode is selected.
The temperature will then increase by
another 2°F/1 (or 2)°C after an additional
30 minutes. This new temperature will be
maintained for 7 hours before it returns to
the originally selected temperature. The
Sleep mode program can be cancelled at
any time during operation by pressing the
Sleep button again.
CHECK FILTER FEATURE:
The Check Filter feature is a reminder
to clean the air filter for a more ecient
operation. The light will illuminate after 250
hours of operation. After cleaning the filter,
press the Filter button to reset the Check
Filter function turning the light o.
ENERGY SAVER FEATURE:
Press Energy Saver button to initiate this
function. This function is available on
COOL, DRY, AUTO (only AUTO-COOLING
and AUTO-FAN) modes. The fan will
continue to run for 3 minutes after the
compressor shuts o. The fan then cycles
on for 2 minutes at 10 minute intervals until
the room temperature is above the set
temperature, at which time the compressor
turns back on and Cooling resumes.
COMFORTSENSE FEATURE:
The ComfortSense function enables the
remote control to measure the temperature
at its current location. When using AUTO
or COOL functions, measuring ambient
temperature from the remote control
(instead of from the indoor unit itself)
will enable the air conditioner to optimize
the temperature around you and ensure
maximum comfort.
This feature can be activated from the
remote control ONLY.
The remote control will send this signal to
the air conditioner every 3 minutes interval
until press the ComfortSense button
again.If the unit does not receive the
ComfortSense signal during any 7 minutes
interval, the unit will beep to indicate the
ComfortSense mode has ended.
TO SELECT THE OPERATING MODE:
To choose the operating mode, press
the Mode button the unit cycles through
the modes, Auto, Cool, Dry, and Fan. The
adjacent indicator light will remain on once
the mode is selected.
The unit will automatically initiate the
Energy Saver function under Cool, Dry,
Auto (only Auto-Cooling and Auto-Fan)
modes.
To operate on Auto mode:
• The fan speed is automatically
controlled based on the temperature
setting and room temperature and
cannot be adjusted.
• The air conditioner will control room
temperature automatically according to
the temperature you’ve set.
• In this mode, the fan speed cannot be
adjusted, as it’s automatically controlled
according to the temperature setting
and room temperature.
To operate on Fan Only:
• Use this function only when cooling
is not desired, such as for room air
circulation or to exhaust stale air (on
some models).(Remember to open the
vent during this function, but keep it
closed during cooling for maximum
cooling eciency.) You can choose any
fan speed you prefer.
• During this function, the display will
show the actual room temperature, not
the set temperature as in the cooling
mode.
• In Fan Only mode, the temperature is
not adjusted.
Loading ...
Loading ...
Loading ...