Loading ...
Loading ...
Loading ...
22
NOTE
The water dispenser has a built-in device
that shuts off the water flow after three
minutes of continuous use. To reset this
shutoff device, simply release the dispenser
paddle.
CAUTION
For proper dispenser operation,
recommended water supply pressure
should fall between 30 psi and 100 psi.
Excessive pressure may cause the system to
malfunction.
Priming the water supply system
1. Begin filling the system by pressing and
holding a drinking glass against the
water dispenser paddle.
2. Keep the glass in this position until
water comes out of the dispenser. It
may take about 1½ minutes.
3. Continue dispensing water for about
four minutes to flush the system and
plumbing connections of any impurities
(stopping to empty the glass as
necessary).
Ice maker operation & care
After the refrigerator is installed properly
and has cooled for several hours, the ice
maker can produce ice within 24 hours. The
ice maker will fill the ice bin from the rear.
You must dispense some ice to force the ice
forward in the bin. This will allow the bin to fill
completely.
Ice Maker and Storage Bin Capacity
The refrigerator ice maker should produce
2.7 to 3.2 pounds of ice per 24 hours.
The refrigerator ice bin will hold around 3.7
pounds of ice.
Using the dispenser after
installation
Before making ice for the first time, be sure
to prime the water supply system. Air in new
plumbing lines can result in two or three
empty ice maker cycles. Furthermore, if the
system is not flushed, the first ice cubes
may have discolored water or have an odd
flavor.
NOTE
Dispensed water is not chilled. For colder
water, add ice to cup or container before
dispensing water.
AUTOMATIC ICE & WATER DISPENSER
Ice/Water Dispenser
Refrigerator Ice Maker
Loading ...
Loading ...
Loading ...