Loading ...
Loading ...
Loading ...
Installation Instructions
REVERSING THE DOOR SWING (CONT.)
I
I-_ REVERSING THE DOOR HANDLES (CONT,)
5.4 Transfer Freezer Door Handle
5.4.1 Remove the screw
holding the handle
to the top of the
door and the two
screws holding the
handle to the 1)ottom
of the door.
5.4.2 Remove the handle.
5.4.3 P, emovc the screw fl'om the
right top edge of the door
and insert it into the
handle screw hole on the
left side.
5.4.4 Transfer the door stop as shown in preceding
section 5.2. I
5.4.5 Attach the handle to the
right edge of the door
with screws at top and
1)ottom, using bottom holes
w_cated 1)y removal of the
door stop screws.
[] RE-HANGING THE DOORS
6.1 Re-hang the fresh food door
6.1.1 I,ower the fresh food door onto the
bottom hinge pin. Be sure the washer
is in place on the pin.
Hinge.m_-_
Bracket
Plastic
Washer
L
RE-HANGING THE DOORS (CONT.)
6.1.2 Insert the pin on the center hinge into the socket in
the top of the door. Place the spacer, then the
washer, on the hinge pin. "_t_ Hinge Pin
NOTE: The center hinge must
be turned o_er as shown when
mounted on the left side.
and Spacer
6.1.3 Tilt the door toward the cabinet. As the door is
1)rought into position, slide the hinge under the head
of the screw which earlier had been partly driven into
the outermost hole. Insert the remaining screw, then
tighten 1)oth screws securely.
6.2 Re-hang the freezer door
6.2.1 Lower the freezer door
onto the center hinge
pin. Be sure the CenterHing
are in place on the pin " .........
and Spacer
6.2.2 Tilt the door toward the cabinet, lifting the top hinge
so the pin fits into the socket on the top of the door.
6.2.3. Make sure the door is slightly above the top of the
cabinet and the gap between the doors is even across
the fl'ont. Tighten the top hinge screws. Do not
overtighten these screws-tighten them until they are
just snug, then turn them another one-half turn.
16
Loading ...
Loading ...
Loading ...