READ ME FIRST! Follow these steps to get started with your remote control.
Plug the charging cable into
the charging jack on the
back/bottom of the remote.
Plug the other end into a
USB power source. The
red charging indicator
illuminates. The green
indicator illuminates when the
remote is fully charged.
Manually turn on the device you want to control.
Find the Code List that came with the
remote. Locate the section for the type of
device you’re trying to program, and nd
your brand in that section. Circle the codes
for your brand and keep them handy.
If you don’t see your brand listed, consult the
Owner’s Manual for other programming options.
1 2
3
VOLUME
VOLUME
HDMI1
Test commonly used keys with the device.
For TVs: test
, VOL+, and (source/input). Try the key as well on Smart TVs.
For streaming players: test
(if applicable), , arrow keys and OK, and .
If these keys work, congrats! You’ve nished programming for this key! If not, try
steps 4 and 5 with the next code for your brand in the code list.
6
For more information, including instructional videos, remote programming codes, and customer support,
visit www.RCACodeSupport.com
To program the other device keys, follow these instructions again. For more detailed instructions, see the
Owner’s Manual included in this package.
RCTSC3B QSG 01 R341U1
Press and hold the device key you want to program
for about 2 seconds, until the indicator light
illuminates and stays on. Then release the key.
4
5
Use the keys in the middle of the remote as
number keys as shown on the left.
Enter the rst ve-digit code for your brand in
the code list (the indicator light ashes after each
digit).
= TV = Streaming player
To program the remote to control a sound bar, press and
hold the
and at the same time until the indicator light
illuminates.
1
5
2 4
3
6 87
9 0
Loading ...
