Loading ...
Loading ...
Loading ...
19
3.8 Adjusting the Rated Current
The MaxiCharger AC Elite (residential) allows you to manually set a lower maximum current using a current
selector when installing your charger on a circuit rated lower than the maximum rating for your charger.
1. Remove the covers and locate the current selector.
2. Use a flathead screwdriver to set the rotary switch to the
appropriate position per the table below.
3. When the current of your charger is set lower than the
maximum rating, choose the correct current value from
the Amperage Labels and affix it over the existing label
on the charger.
Position Amperage (A) Circuit Breaker Rating
0 Not in Use N/A
1 16 20
2 24 30
3 32 40
4 40 50
5 48 60
6 50 70
7 Not in Use N/A
8 Not in Use N/A
9 Not in Use N/A
NOTE
When the rotary switch is at 0, 7, 8 or 9, the corresponding amperage will be 16, 50, 50, and 50,
respectively.
The maximum current is limited by the power rating of a charger as follows:
— For 9.6 kW model: 40 A
— For 12 kW model: 50 A
CAUTION
To reduce the risk of fire, only connect your charger to a circuit with a branch circuit over-current protection
of 125% of the selected maximum amperage setting of the device in accordance with ANSI/NFPA 70 (US) CSA
C22.1 (Canada).
Loading ...
Loading ...
Loading ...