Loading ...
Loading ...
Loading ...
16
3.5 Power Supply Wiring
IMPORTANT
Use copper conductors with the maximum wire size of 6 AWG (16 mm²).
Ensure that the screws for the terminal blocks are properly tightened.
Ensure that there is no copper wire or debris left inside of the charger before switching on the electrical
power to the charger.
Removing the NEMA Cable (Optional)
In case you need to replace the NEMA cable with a
Hardwire, remove the NEMA cable by loosening the
terminal screws as per the diagram. Then loosen the
cable gland and pull the NEMA cable out.
Step 1
Rear Entry
1. Remove the rear entry power conduit plug from the
charger and replace it with the 3/4” conduit fitting
(I, not included in the package). Remove the lock nut
from the conduit fitting and set it aside.
2. Insert the AC input cable into the conduit fitting and
attach the conduit fitting to the charger.
3
. Screw the lock nut (J) into the conduit fitting.
Loading ...
Loading ...
Loading ...