Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/19413047-e950-103/bgb.png)
22
Descaling phase 2 ( ):
When illuminates, proceed as follows:
• Empty and reinsert the drip tray.
• Rinse the water reservoir thoroughly.
• Fill the water reservoir with tap water up
to the max. mark.
• Insert the water reservoir.
• Press the button to continue with the
descaling programme (takes about 5
minutes).
Descaling phase 3 ( ):
When illuminates, proceed as follows:
• Empty the drip tray and reinsert it.
When is illuminated, the descaling
programme is nished.
• Insert the water lter if necessary
("Water hardness and lter", page 18).
Other settings
Energy-saving mode
After the last action, the appliance
switches automatically (depending on the
settings) to the energy-saving mode. The
appliance is set to 5 minutes in the
factory.
• Switch on the appliance.
• Press the and buttons
simultaneously until ashes.
• Press the button twice.
illuminates.
• Press the button until one of the four
times is set. The time is displayed by the
beans on display 9.
Display Time
5 minutes
(factory setting)
15 minutes
30 minutes
ashing
Off
• Press the button to conrm the
setting.
Auto-OFF function
The appliance switches off automatically
after the last action (depending on the
setting). From the factory, the appliance is
set at 30 minutes .
• Switch on the appliance.
• Press the and buttons
simultaneously until ashes.
• Press the button three times.
illuminates.
• Press the button until one of the
four switch-off times is set. The time is
displayed by the beans on display 9.
Display Time
30 minutes
(factory setting)
2 hours
4 hours
ashing
8 hours
• Press the button to conrm the
setting.
BA_Solo_082016.indd 22 21.09.2016 07:23:53
Loading ...
Loading ...
Loading ...