Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/19413047-e950-103/bga.png)
21
EN
Cleaning phase 2 ( ):
When illuminates, proceed as follows:
• Fill the water reservoir with tap water up
to the max. mark.
• Press outlet 2 all the way down.
• Press the button to continue with
the cleaning programme (takes about 5
minutes).
Cleaning phase 3 ( ):
When illuminates, proceed as follows:
• Empty the drip tray and coffee grounds
container.
• Insert the drip tray without the coffee
grounds container
• Place the coffee grounds container
under outlet 2.
Cleaning phase 4 ( , the middle
bean is ashing):
• The cleaning programme will be
continued again and takes about 5
minutes.
When illuminates, proceed as follows:
• Empty the drip tray and coffee grounds
container and insert them in the
appliance as usual.
The cleaning programme is nished.
Integrated descaling programme
Warning!
The descaling agent can cause skin
irritations
Comply with the safety instructions
and the dosing information specied
on the descaling agent packaging.
The integrated descaling programme
(takes about 30 minutes) removes lime
residues inside the appliance. The symbol
for descaling ashes during the entire
process.
The descaling programme should be
performed every 3 months, however, at
the latest when illuminates ("Setting
the water hardness" page 19).
Only use Melitta
®
ANTI CALC.
• Switch off the appliance.
• Remove the water lter if necessary
("Water hardness and lter", page 18).
• Press the and buttons
simultaneously for approx. 3 seconds.
ashes, illuminates.
Descaling phase 1 ( ):
• Empty and insert the drip tray.
illuminates.
• Completely empty the water reservoir.
• Add the descaling agent to the water
reservoir according to the instructions on
the packaging.
• Insert the water reservoir.
• Press the button to start the
descaling programme (takes about 15
minutes).
BA_Solo_082016.indd 21 21.09.2016 07:23:53
Loading ...
Loading ...
Loading ...