Loading ...
Loading ...
Loading ...
DJI Mavic 3E/3T User Manual
68
©
2022 DJI All Rights Reserved.
1. Palette: displays the highest and lowest temperature measurement values of the
current view. Tap to choose between different infrared temperature measurement
palettes or enable the isotherm to set temperature measurement intervals. Note that
if the measured area exceeds the maximum or minimum temperature measurement
values of the current view, the setting will not take effect.
2. Gain Modes: high gain mode provides more accurate temperature measurements with
a measurement range from -20° to 150° C (-4° to 302° F), while low gain mode supports
a wider temperature measurement range of 0° to 500° C (32° to 932° F). Note that the
range is only a theoretical value, and even though the thermal camera can measure
temperatures beyond the range, the value may deviate substantially.
3. Display Mode: the infrared screen displays the infrared view alone by default. Tap to
enable or disable side-by-side view. When enabled, both the infrared and zoom view will
be displayed side by side.
4. FFC Calibration: tap to start FFC calibration. FFC calibration is a function of the thermal
camera that optimizes image quality for easy observation of temperature changes.
5. Zoom (Thermal Camera): tap to adjust the digital zoom of the thermal camera with a
maximum zoom capability of 28x. Tap and hold to zoom directly to 2x.
AR Projection
DJI Pilot 2 supports AR Projection of the following:
a. Home Point: when the home point is beyond the range of the current view, it will still be
displayed on the edge of the view. The aircraft can be turned toward the home point,
following the direction of the arrow.
b. PinPoints: a PinPoint appears bigger when near the aircraft and smaller when it is far.
This allows the users to judge the distance between the PinPoint and the aircraft based
on the size of the PinPoint. When a PinPoint selected is beyond the range of the current
view, it will still be displayed on the edge of the view. The aircraft can be turned toward
the PinPoint following the direction of the arrow.
c. Waypoints: in a flight task, the two waypoints that the aircraft is about to pass will be
projected on the camera view. The next waypoint to be reached will appear as a solid
triangle marked with a serial number, while the subsequent waypoint will appear as a
dotted triangle marked with a serial number.
d. ADS-B Manned Airplane: when a manned airplane is detected nearby, it will be projected
on the camera view. Ascend or descend the aircraft as soon as possible to avoid the
manned airplane by following the prompted instructions.
Loading ...
Loading ...
Loading ...