Loading ...
Loading ...
Loading ...
DJI Mavic 3E/3T User Manual
28
©
2022 DJI All Rights Reserved.
2. If there is an obstacle between a manned airplane and a DJI aircraft, DJI AirSense will
not be able to receive ADS-B messages from the airplane or send warnings to the user.
Keenly observe your surroundings and fly with caution.
3. Warning prompts may be delayed if DJI AirSense experiences any interference from the
surrounding environment. Keenly observe your surroundings and fly with caution.
4. Warning prompts may not be received if the DJI aircraft is unable to obtain information
on its location.
5. DJI AirSense cannot receive ADS-B messages from manned airplanes or send warnings
to the user when it is disabled or misconfigured.
When the DJI AirSense system detects a risk, the AR projection display will appear in DJI Pilot 2,
intuitively showing the distance between the DJI aircraft and the airplane and issuing a warning
alert. Users should follow the instructions in DJI Pilot 2 upon receiving the alert.
1.
Notice:
a blue airplane icon will appear on the map.
2.
Caution:
the app will display the message: "Manned aircraft detected nearby. Fly with
caution." A small orange square icon with the distance information will appear on the
camera view, and an orange airplane icon will appear on the map view.
3.
Warning:
the app will display the message: "Collision risk. Descend or ascend
immediately." If the user is not operating, the app will display: "Collision risk. Fly with
caution." A small red square icon with the distance information will appear on the
camera view, and a red airplane icon will appear on the map view. The remote controller
will vibrate to alert.
Advanced Pilot Assistance Systems (APAS 5.0)
The Advanced Pilot Assistance Systems 5.0 (APAS 5.0) feature is available in Normal
mode and Tripod mode. When APAS is enabled, the aircraft will continue to respond to
user commands and plan its path according to both control stick inputs and the flight
environment. APAS makes it easier to avoid obstacles, obtain smoother footage, and give a
better flying experience.
Keep moving the control sticks in any direction. The aircraft will avoid the obstacles by flying
above, below, or to the left or right of the obstacle. The aircraft can also respond to the
control stick inputs while avoiding obstacles.
When APAS is enabled, the aircraft can be stopped by pressing the flight pause button on
the remote controller. The aircraft brakes and hovers for three seconds and awaits further
pilot commands.
To enable APAS, enter the camera view in DJI Pilot 2, tap
-> , then Obstacle Avoidance,
and enable APAS by selecting Avoid.
Loading ...
Loading ...
Loading ...