Loading ...
Loading ...
Loading ...
7
Before first use, ensure you have all parts and accessories-power base, milk jug, frothing disc, stirring disc and jug lid.
Remove and safely discard all promotional labels and packing materials attached to the milk frother.
Wash the milk jug, discs and lid in warm soapy water then rinse and dry thoroughly. Wipe the exterior of the power base
with a soft damp cloth then dry thoroughly.
BEFORE FIRST USE
01. Place the milk frother on a fat level surface and plug the power cord into a 110V-120V power outlet. The indicators
will all light up once, then only the Warm Thick Foam indicator will light up and other indicators will o.
02. Select the frothing or stirring disc.
Choose the frothing disc for warm thick foam, warm foam and cold foam froth.
Choose the stirring disc for heating milk.
03. Insert the disc onto the shaft at the base of the milk jug. Ensure the disc is inserted the
correct way with the wider part of the disc at the bottom of the jug.
The disc should click' securely onto the shaft.
04. Pour the required amount of cold, fresh milk into the milk jug then cover with the jug lid. Always use cold milk and
fill the milk jug between the MIN and MAX level marking. Overfilling may result in spillage, while under filling
prevents the disc from working optimally.
MAKING DRINKS
After 30 seconds of non-use, the milk frother will enter sleep mode. All the indicators will o.
To reactivate, turn or press the Start/Stop push-dial.
NOTE:
For optimum froth, do not exceed the MAX measurement markings inside the milk jug.NOTE:
If the disc is not inserted correctly it may dislodge during operation, a grinding noise may be heard,
or milk will not swirl. Do not operate the milk frother without a frothing disc inserted into the milk jug
as this can cause uneven heating and burning.
NOTE:
Loading ...
Loading ...
Loading ...