Loading ...
Loading ...
Loading ...
8
05. Ensure the jug lid is securely attached and the outside of the milk jug is clean. Place the milk jug onto the power
base, ensuring the jug is sitting flat.
06. Turn the Start/Stop push-dial to the desired setting. The indicator that corresponds to the selected setting will
light up.
07. Only press the Start/Stop push-dial once, firmly. The milk frother will start to work and the indicator will slowly
blink.
If the milk frother does not do this, try pushing the Start/Stop push-dial again to ensure it has been properly
activated.
08. To stop the process at any time, press Start/Stop push-dial again.
09. When the process ends, the milk frother will automatically stop. This will take anywhere between 2-7 minutes.
10. Carefully remove the milk jug from the power base as the milk jug and contents will be hot . Be careful not to place
the milk jug on a table cloth, plastic surface or heat sensitive surface which may scorch or melt.
11. Remove the jug lid, pour and/or spoon out the frothed milk.
12. Clean the milk jug and disc immediately after use. Both will be hot so allow them to cool completely
(or filling the milk jug with water for quick cooling) before disassembling.
01. Always use cold, fresh ( or fresh opened ) milk. The colder the liquid the better. Warm milk will not foam up
properly.
02. Not all milk alternatives produce foam. Experiment with dierent milk options and frothing discs to achieve the
desired result.
03. When frothing big batches, allow the milk frother to rest for about 3 minutes after every 2 frothing cycles.
04. Ensure the milk jug and frothing disc are clean before use.
TIPS
Loading ...
Loading ...
Loading ...