Loading ...
Loading ...
Loading ...
Power Plug
(Approximately once a month)
Dry cloth Wet cloth
1
Unplug the power plug and
wipe it with a dry cloth.
2
Insert the power plug.
The "Power" LED lights up.
WARNING
●
Periodically remove dust from
the blades and other parts of the
power plug.
•
Unplug the power plug and wipe it
with a dry cloth.
●
Fully insert the power plug.
●
When unplug the power plug, hold
the main body of the power plug.
•
Pulling the power cord may
damage the power plug or power
cord.
Maintenance
Power Plug
Various Operations
Other settings
Other settings
Set whether or not to make a beep sound
Beep sound
*1
Set whether or not to use the personal setting
lock
Personal setting lock
*1 When you change each of the settings, set the electronic sound to "Make a beep sound".
3
Press "Stopping" button.
<Settings complete>
1
Press "Stopping" button until all LEDs
on the remote control start fl ashing.
(about 10 seconds)
2
Press "Rear cleansing" button.
The setting changes each time
the button is pressed once
Set whether or not to make a beep sound
For making a beep sound
One short beep.
For not making a beep sound
One long beep.
2
Press "Personal setting lock 2"
button for 5 seconds or longer.
The setting changes each time
the button is held down
longer than 5 seconds.
Set whether or not to use the personal
setting lock
•
Check by "Wand position adjustment" LED (Page 27)
For setting to "ON"
For setting to "OFF"
The "Power"
LED goes off .
Main Unit
Do not use a dry cloth
or toilet paper on plastic
parts.
(May cause damage.)
For safety, unplug the power
plug before maintenance.
*1
WARNING
Always unplug the power plug from
the outlet before maintenance or
inspection.
(Failure to do so may cause electric shock
or malfunction, resulting in a breakdown.)
OFFLit
*1 Except when using "Wand cleaning".
31
Maintenance
30
Loading ...
Loading ...
Loading ...