Loading ...
Loading ...
Loading ...
Basic Operation
Using the Remote Control
*1
Stopping
Drying
Cleansing
"Front cleansing"
Serves as a bidet for ladies.
"Rear soft cleansing"
Cleanses your rear with
mild water pressure.
"Stopping"
Stops the operation.
"Warm air drying"
Dries your rear.
"Rear cleansing"
Cleanses your rear.
The setting changes between
and
each time the is pressed.
"Timer energy
saver"
Low battery warning
mark
(Page 38)
"Auto energy
saver"
Adjust temperatures (Page 20) Saving energy (Page 24, 25)
"Setting
confi rmation"
The current setting can be
discerned from the LEDs.
"Wand cleaning"
To clean the wand with it extended.
(Page 36)
"Power ON/OFF"
Pressing it about 3 seconds or longer
turns the power on/off .
•
If the remote control is secured to
prevent theft (Page 15 2-
2)
Temperatures Energy saver
"Toilet seat
temperature"
"Warm water
temperature"
"Drying air
temperature"
For your information
●Water may sometimes come out from around the wand when it expands in the warm water tank, but this is
normal.
●As the warm water tank of hot-water system is used, the temperature of warm water may become lower if it is
continuously consumed.
Operate the controls on the remote control; a beep sounds when the main unit
receives the signal.
●
Functions that operate when a
button is pressed during "Rear
cleansing", "Rear soft cleansing"
or "Front cleansing" cleansing.
"Personal setting lock"
You can store your preferred "Wand position", "Water
pressure" and "Warm water temperature" settings.
●
To store a settings
While cleansing is in progress, set your preferred "Wand position",
"Water pressure" and "Warm water temperature" and then press
and hold
or for 2 seconds or longer.
●
To use
Press or , and then press the button for the cleansing you want to use.
The "Wand position" and "Water pressure" lamps will light up for about 10
seconds in their set positions, and the "Water temperature" display switches.
The setting changes between "ON" and
"OFF" each time the button is pressed.
You can adjust the water pressure
to one of fi ve levels.
([-] Softer, [+] Stronger)
After you press the "Water pressure
adjustment" button, the set position
will light for 10 seconds."
You can adjust the washing position to
5 diff erent points between the front and
the rear, using the [▲] and [▼] buttons.
After you press the "Wand position
adjustment" button, the set position
will light for 10 seconds."
It will return to the 3rd position for
a while (not exceeding a maximum
of 5 minutes) once operation of
the remote control has fi nished.
It will return to the 3rd position for
a while (not exceeding a maximum
of 5 minutes) once operation of
the remote control has fi nished.
"Oscillating cleansing"
The wand moves back and forth
to cleanse your rear thoroughly.
"Water pressure adjustment"
"Wand position adjustment"
Note
Sitting back on the toilet seat
makes it easier to adjust the wand
position and to reduce splashing.
*1 Remote control transmitter (Front side, Top side)
"Pulsating cleansing"
Cleanses with the water pressure
pulsating between soft and strong.
Remote control back side
This section is an overview of the settings that can be confi gured with the remote control.
See the corresponding pages for the detailed descriptions.
Cleans the wand with "EWATER+".
The wand can be automatically
cleaned when you use the
cleansing functions (Rear cleansing,
Front cleansing, etc.). (Page 16)
"Wand CLEAN"
18 19
Operation
Loading ...
Loading ...
Loading ...