Loading ...
Loading ...
Loading ...
will slew to and stop at the pre-stored position one by one from “a” to “f”. When the mount
stops, it will send a signal to trigger the attached camera to take a picture. The MiniDob will
stop at the last position for about 3 minutes before it re-starts the cruising again.
5.By default, when the MiniDob stops at a pre-stored position, the active time of the shutter
triggering signal is 3 seconds. User can press button a~f and button DOWN to change the
time to 1~6 and 7 seconds during the cruising. The proper time depends on how long the
camera takes to nish the exposure measurement and auto-focus functions.
6.During the cruising, user can press the SET button to pause. Release the SET button will
resume the cruising.
7.Press buttons “DOWN” and “RIGHT” simultaneously to stop the cruising.
8.User might want to clear and skip one or more of the preset positions (“a” to “f”). To do
this, user must store the power-on position to the specic buttons immediately after turning
on the power.
Video Cruising Function
1.The MiniDob mount can also cruise through up to 6 pre-stored positions without full stop
at the spots. This is for using a camcorder to record a continuous video.
2.Press buttons “GO/4” and “Down” to activate the “Video Cruising” function.
3.During the cruising, user can press the SET button to pause. Release the SET button will
resume the cruising.
4.The mount does not stop between cruising cycles.
5.Press buttons “DOWN” and “RIGHT/f” to stop the cruising.
Panoramic Photography
1.The MiniDob mount can control a camera to take panoramic photos.
2.The camera must have an external shutter control port, and a proper bracket should be
used to attach the camera on the MiniDob mount.
3.Set the FOV of the camera
• Level the camera with the mount. Turn off the power of the mount and then turn it on
again.
8
Loading ...
Loading ...