Loading ...
Loading ...
Loading ...
The MiniDob mount can be powered from
the internal batteries or an external DC
power supply (Figure 4).
The battery compartment is located on
the fork arm and holds eight (8) AA
alkaline batteries (to be supplied by user).
The external DC power requirement is
12-Volts DC Nominal and it should be
able to supply at least 500mA of DC
current. The cord plug should be 2.1mm
I.D. x 5.5mm O.D. x 12mm, female and
positive center. The maximum voltage
should not exceed 14-Volts and the
minimum is 7.5-Volts.
Powering The Mount
HC jack is used to connect to SynScan AZ GOTO hand control .
SNAP jack is used for auto imaging.
WARNING: SOME SIMPLE TRANSFORMER STYLE AD-DC POWER CAN OUTPUT
DC VOLTAGE THAT IS MUCH HIGHER THAN THE VOLTAGE AS SHOWN ON ITS
LABEL. AVOID USING SUCH ADAPTER, OTHERWISE THE MOUNT MIGHT NOT
WORK AND MAY BECOME DAMAGED.
Figure 4
3
battery cell
Loading ...
Loading ...
Loading ...