Loading ...
Loading ...
MOUNT AND TELESCOPE ASSEMBLY
Mount Setup
Figure 1 Figure 2
Figure 3
1.Place the mount on a ξat surface. For
astronomical usage, place a bubble leveler
on the base and adjust the 2 adjustable
feet to level the base (Figure 1).
2.Loosen the locking knob on the mounting
platform. Slide the dove tail bar on the
telescope tube into the slot of the mounting
platform and tighten the locking knob. The
fork arm should be at the right side of the
telescope tube when the telescope tube
points forward (Figure 2).
You must be careful not to use an optical
tube that is too heavy or too big as the
motor assembly will not be able to operate
properly and the mount may get damaged.
As a guideline, do not use tubes that
exceed 2 kgs or 4.4 lb (Figure 3).
Optical Tube Notes
locking knob
2
Loading ...
Loading ...
Loading ...