Loading ...
Loading ...
Loading ...
5
⚫ If you have to change the oven power cord, the earthing (yellow/green) conductor
must always be 10 mm longer than the line conductors.
⚫ Care must be taken to ensure that the temperature of the mains supply cable does
not exceed 50°C.
⚫ If the mains supply cable is damaged, then it must be replaced by an appropriate
replacement which can be obtained from Spares Department.
Assembly of ceramic hob :
Preparing the unit for a built-in appliance
WARNING
The kitchen units that are in direct contact with the appliances must be heat-
proof(min. 95°).
The appliance can be installed on a work surface with a thickness of between 30
and 40 mm and near to walls which are higher than the work surface,maintaining a
minimum distance of 100 mm.
Carry out all cutting of the unit and work surface then carefully remove shavings or
sawdust before inserting the appliances.
To ensure a correct ventilation of the hob please comply with the dimensions
shows in figures .
Always refer to the manufacturer for specific instructions,
Make sure the surface is level and square and that no part interferes with the
space required for installation.
Prepare the cut as indicated(see installation dimensions).
Loading ...
Loading ...
Loading ...