Loading ...
Loading ...
Loading ...
12
✓ If more than one zone is operating at the same time, total power will equal to the
sum of the powers of all the working cooking zones, each cooking zone will work
according to their power modulation ratio, and will not affect each other.
✓ You can select the appropriate output power level by rotating the programming
button of the corresponding hob.
✓ The power level is divided into 16 levels, including the shutdown level (0 level). For
the programming button, rotating clockwise to increase the power level, and
rotating counterclockwise to decrease the power level. When rotating
counterclockwise, if the fire power position is “0” at the beginning, you will adjust to
15 level and then reduce the level in turn.
✓ When switching any of the cooking zone power level to 0, it will stop the power
output of that cooking zone.
✓ If a cooking zone has been heated,power level of all the cooking zone are “0”, the
appliance will automatically enter into shutdown status after 1 minute no operation.
4. Shutdown
✓ Under standby mode or heating mode, press and holding “ ” button for 3s,the
appliance will go into shutdown mode. If there is residual heat in the corresponding
cooking surface at this time, the corresponding cooking zone indicator flashes,
indicating a warning of residual heat.
7. Default timing
✓ All the cooking zones have default timing function.The relationship of default
timing and power level refers to table below:
Power Level
1
2
6
4
5
6
7-15
Default timing(h)
6h
6h
5h
5h
4h
4h
1.5h
✓ When all the default timing is reached, the cooking zones will switch off
automatically and enter into standby mode.
8.High temperature warning
✓ Press and hold power button “ ” manually for 3s till switch off, the whole
appliance will stop heating, but the cooking surface still has high temperature, the
indicator light of the cooking zone that stops heating flashes, indicating that the
corresponding heating furnace surface is hot.
✓ As long as the cooking zone has heated before, the indicator light will display for
35 minutes continually after the hob turn off.
9.Protection function
✓ High temperature protection: The electronic temperature sensor on the control
panel will transmit the real-time temperature to the chip of the control panel. The
control sensor starts protection when the electronic temperature sensor gauge the
current temperature is higher than a certain value, to reduce the heating level of
Loading ...
Loading ...
Loading ...