Loading ...
Loading ...
Loading ...
_ nstall Side Burner Gas Valve and Side Burner Electrode Wire
[] insert the Side burner Gas Valve Assembly into Side Burner Tube (See Figure 1). Be sure
the orifice is inside the Burner Tube properly (see warning on Page 3), or lighting the
burner may cause explosion and/or fire.
[] insert the Side Burner Gas Valve Assembly through the Side Burner Gas Valve Hole on the
Side Burner Frame. Align the 2 holes on the Side Burner Frame with the threaded holes
on the Side Burner Gas Valve Bracket. Then insert 2 Screws S112M04082 provided and
tighten securely.
[] Fasten the Control Knob onto the Side Burner Gas Valve Stem. Be sure that the
OFF position faces the Burner.
[] Connect the Side Burner Electrode to Side Burner Valve. (See figure 2).
Figure 1
Phillips Head Screw M4x8mm
Qty. 2
Part # S112M04082
(Black Painted)
Figure 2
ControI Knob for Side Burner
Qty. 1
Part # P03426083H
Scale 1:2
Install Grease Draining Tray
[] From the back of the grill, remove the Rear Upper Bowl
Panel. (See figure 3).
[] Slide the assembled Tray side tabs over the side rails
underneath the Grill Bowl and replace the Rear Upper
Bowl Panel. (See figure 4).
[] Install Grease Receptacle under the Grease Draining
Tray from the front of grill. (See figure 5).
ilil
Figure 3
Figure 5
Side Burner Electrode Wire
Figure 4
13
Loading ...
Loading ...
Loading ...