Loading ...
Loading ...
Loading ...
go.corn
Possible Causes What To Do
Oven temperature too Oven thermostat ® See the Adjust the oven thermostat-Easy to do
hot or too cold needs adjustment, yourself! serdon.
Clock and timer do Plug on range is not completely o Make sm'e electrical ping is plugged into a live, properly
not work inserted in the electrical outlet, grounded outlet.
A fuse in your home may be * Replace fuse or reset dreuit breakeL
blown or the circuit Breaker
tripped.
Oven controls improperly set. * See the Using the clock and timer section.
Display goes blank A fuse in your home may he * Replace the fuse or reset tile ci/'ctlit breaker.
blown or the circuit brealmr
tripped.
The dock is turned off from * See tile Using the clock and timersectiom
showing in the display
Oven dooris crooked Tile door is out of position. * Because tile oven door is removable, it sometimes gets
out of l)ositiou during installation. To straighten tile
door, push down on tile high corner.
Oven makes This is the sound of the * This is normal.
clicking noise heating element turning
off and on during
cooMng functions.
"F--andanumber You have a ftmctlon errur code. * Press the CLEAR/OFFpad. Put tile oven back
or letter" flash in into operation.
the display If the function code repeats: * Disrmmect all power to tile rallge for at least 30
seconds and then reconllect i)oweL If the function
error code repeats, call flw service.
® ()n self:cleaning models, if a function error code
apl)eals during the sel6cleaning cycle, check tile oven
door latch. Tile latch may have been moved, if only
slightl,_, fl'om tile locked position. Make sure tile latch
is moved to tile right as flu" as it will go. Press the
CLEAR/OFFpad. Allow tile oxen to cool for one hour.
Put tile oven back into operation.
Power outage Power outage or surge.
Oisplay flashes Power failure.
Unable to get the display Oven control pads were not
to show"SF pressed properly.
®Some models will automatically resume their setting once
tile power is restored. On models with a clock, you must
reset the clock. If tile ox ell was ill use, you must reset it by
pressing tile CLEAR/OFFpad,setting tile clock and
resetting ally cooldng fimction.
* Reset tile clock.
* Tile BAKEand BROILHI/tO pads m ust be pressed at tile
same time and held for 3 seconds.
45
K4_
€
i =
r =
b
?'7;i!_'
Loading ...
Loading ...
Loading ...