Loading ...
Loading ...
Loading ...
6. Find the four (4) height adjustment screws located on the corners of the decorative grille.
Use the four(4) height adjustment screws to adjust gap between decorative grille and
Ceiling Cassette body so that gap is reduced to 1/4-in (6mm) to 3/8-in (9mm). Make certain
the decorative grille is not distorted by over tightening.
DECORATIVE GRILLE INSTALLATION
Mounting Decorative Grille
1. Carefully unpack decorative grille and align the
decorative grille to the Ceiling Cassette main body.
2. Temporarily attach the decorative grille to the
ceiling cassette main body at two (2) corner points.
3. Locate the two (2) Swing Louver electrical
connectors on the decorative grille.
4. Connect both Swing Louver connectors on
decorative grille to matching connectors on the
Ceiling Cassette body.
5. Complete the decorative grille attachment by
hooking the remaining two (2) corners to the
Ceiling Cassette main body.
Note: Be careful not to pinch the swing
louver motor wires between the decorative
grille and ceiling cassette main body.
Height adjustment screw
Swing louver connector
Swing louver connector
Decorative grille
Hook & latch
Hook & latch
Ceiling Cassette
main body
Refrigerant
pipes
Hook & latch
Ceiling
Between 1/4-in.
and 3/8-in.
Decorative grille
Ceiling
7. Verify that the seal between decorative grille
and Ceiling Cassette main body is tight all the
way around the unit to prevent air leakage. Use
the
height adjustment screws to adjust the gap.
25
Loading ...
Loading ...
Loading ...