Loading ...
Loading ...
Loading ...
LP Tank Installation
Open front doors of cabinet. Slide out tank support. Set base of tank into tank support hole with tank
collar opening facing to the right as shown. Connect regulator to tank (see page 5 of Use and Care
section). Slide tank back into cabinet.
Problem Possible Cause Corrective Action
Grill or side burner
will not light
1. The ignition wire came off
the electrical igniter.
2. The distance between the
ignition pin and the burner
is greater than 0.1-0.2
inch(side burner).
3. The ignition wire is broken.
4. The battery has died.
5. The battery is in the wrong
polarity.
6. The electrode tip does not
produce sparks at the
burner port.
7. No gas supplied.
8. Air shutter opening is too
big.
1. Reconnect the ignition wire to the
electrical igniter.
2. Loosen the ignition pin and adjust the
distance, then fasten it again.
3. Call customer service for a
replacement ignition wire.
4. Install a new AA battery.
5. Change the battery polarity.
6. Reinstall the electrode.
7. Turn on the regulator valve.
8. Loosen the air shutter and adjust the
opening to a smaller size.
29
Loading ...
Loading ...
Loading ...