Loading ...
Loading ...
Loading ...
UNPACKING
After removing all parts and hardware pack from the top of the shipping box, and when the only part showing is
the grill head, use a box cutting knife to slice down the sides of the box. Be careful of staples along shipping box
edges.
Remove styrofoam packing to gain access to the grill head. Allow grill head to rest on cardboard until placing grill
head on cart in Step 13.
Open grill lid and remove all packaged parts and packing material.
WARNING: Assemble and place the grill on a flat level surface. Compare the parts and hardwarewith the
list and diagrams. Do not attempt assembly if any part is missing or damaged.
Attach the casters to the bottom panel with 4 screws each as shown.Attach the two locking casters
at the back of the grill. After attaching all casters, turn the bottom panel over.
Bottom Panel
Locking Caster
1/4-20x 5/8" Screw
Qty. 16
Caster
Attach the door magnets to the holes in the front of the bottom panel with 2 screws each. Do notfully
tighten at this time.
Bottom Panel !/I_
5/32-32 x 3/8" Screw
Qty.4
Door Magnet
17
Loading ...
Loading ...
Loading ...