Loading ...
Loading ...
Loading ...
Temperature Control
6
The cooler should be placed in a room that is dry and ventilated. The cooler cannot be placed under direct sunlight
or next to heat source (such as a radiator, stove, etc.), and a suitable insulation board must be applied if necessary.
Try to shorten opening time of cooler’ s door.
Avoid putting warm beverages in the cooler.
PROPER USE OF BEVERAGE COOLER
INTRODUCTION TO THE BEVERAGE COOLER’ S FUNCTIONS
Energy Conservation
Display Controls
1.Standby Mode
2.Memory Function
3.Lighting
4.Temperature Setting
5.Fault Indicators
6.INTERNAL FAN
FAULT CODE
E1
E2
DESCRIPTION
R Room sensor failure
R room defrost sensor failure
When turning on for the first time, the display screen will be a full display for 3 seconds and the startup tone will ring.
To activate standby mode, hold the standby button for 3 seconds. You will hear a beep and the display area will be
cut off. To deactivate standby mode, press the button again.You will hear a beep and the standard display will show.
If turned off, this cooler will remember any settings in place and will work according to those settings once it’ s turned
on again.
Press the lighting button to turn the light on or off.
Press the increase temperature button to increase the temperature one degree at a time. Press the decrease
temperature button to decrease the temperature one degree at a time.
If any of these indicators are displayed it means the cooler has the following issues.
This beverage refrigerator is equipped with an internal fan that prevents uneven temperature distribution, ensuring
all of your beverage reaches your desired temperature .
It is recommended you install the appliance in a place where the ambient temperatures is above 60°F (16°C) and
below 90°F (32° C). If the ambient temperature is above or below recommended temperatures, the performance may
be affected. For example, placing your appliance in extreme cold or hot conditions may cause interior temperatures to
fluctuate.
Note:If you want to switch between Celsius and Fahrenheit, press and hold the Drop key and Rise key simultaneously
for 3 seconds, the temperature can be converted.
Loading ...
Loading ...
Loading ...