Loading ...
Loading ...
Loading ...
Installation
5
A freestanding installation will allow you to install the beverage refrigerator in any place you desire
provided that the req uired clearance space around the appliance is respected. In every setting, there
must be an ad-equate ventilation and a ccess for service. Never install or operate the unit in an
enclosed area, such as a closed cabinet. Allowance of at least 5 inches (127mm) of space between
the back and sides of the appliance are suggested, which allows the proper air circulation to cool the
compressor and condenser.
Improper use of the grounded plug can result in the risk of electrical shock. If the power cord is
damaged, have it replaced by a qualified electrician or contact EUHOMY Service Department.
This appliance requires a standard 115/120 Volt AC ~/60Hz electrical ground outlet with three-prong.
Have the wall outlet and circuit checked by a qualified electrician to make sure the outlet is properly
grounded. The cord should be secured behind appliance and not left exposed or dangling to prevent
accidental injury.
The appliance should always be plugged into its own individual electrical outlet which has a voltage
rat- ing that matches the rating label on the appliance. This provides the best performance and also
prevent overloading house wiring circuits that could cause a fire hazard from overheated. Never
unplug the ap- pliance by pulling the power cord. Always grip the plug firmly and pull straight out from
the receptacle. Repair or replace immediately all power cords that have become frayed or otherwise
damaged.
Do not use a cord that shows cracks or abrasion damage along its length or at either end. When
moving the appliance, be careful not to damage the power cord.
Because of potential safety hazards, it is strongly recommended that you do not use an extension
cord with this appliance. However, if you must use an extension cord, it is absolutely necessary that it
be a UL-Listed, 3-wire grounding type appliance extension cord having a grounding type plug and
outlet and that the electrical rating of the cord be 115 volts and at least 10 amperes.
FREESTANDING INSTALLATION
ELECTRICAL CONNECTION
EXTENSION CORD
Loading ...
Loading ...
Loading ...