Instruction Manual
Beverage Refrigerator
Don’t forget to register your product at www.euhomy.com/register
for updates, warranty, and other relevant information.
Dear Customer,So lucky to meet you guys !!!
Thanks for making a purchase on Euhomy!
We hope to provide you with sincere service. If there is anything missing or wrong with your order，
If you have any question about using our beverage cooler. PLEASE reach out to us.
Email-([email protected]) or Facebook-(@Euhomy).
Euhomy team will answer your doubts online for 24 hours. Your satisfaction is our ultimate goal.
We' d appreciate if you could share your experience with other shoppers on Amazon. We' d love to
make it right for you! If you just want to see the problem description, you can directly see the tenth
page, Or contact us directly. Email:[email protected]
Our Mission:To be the most trusted appliance brand, Creat compact and practical appliance to better
your life.
Congratulations
Safety precautions
Temperature Control
Installation
Placement
Defrosting and Normal Sounds
Warranty
Maintenance
Contents
1
2-3
4-5
6
8
9
10
7
Safety Precautions
2
SAVE THESE INSTRUCTIONS / For Household Use Only
WARNINGS RELATED TO ELECTRICITY
WARNINGS RELATED TO USE
WARNINGS RELATED TO PLACING ITEMS
Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction.
Do not use mechanical devices or other means to accelerate the defrosting process, other than those
recommended by the manufacturer.
Do not store explosive substances such as aerosol cans with a flammable propellant in this
appliance.
Do not use extension cords or ungrounded (two prong) adapters.
This appliance is intended to be used in households and similar applications such as: staff kitchen
areas in shops, offices and other working environments; hotels, motels and other residential type
environments; bed and breakfast type environments; catering and similar non-retail applications.
Do not pull the power cord when pulling the power plug of the beverage cooler. Please firmly grasp
the plug and pull it out from the socket directly.
Do not damage the power cord under any condition.
Please use a dedicated three-hole power socket which is 15A or more and not shared with other
electrical appliances.
Please ensure that the grounding electrode of the power socket is equipped with a reliable grounding
line.
The beverage cooler uses AC power supply of 115V/60 Hz. If the voltage fluctuation exceeds the
range of 115V +- 10%, it can cause accidents or damage the cooler.
In case of leaking gas, turn off the leaking valve and open your doors and windows. Do not unplug
the cooler yourself, as it may cause a fire. Contact customer support.
For your safety, don’ t place electric devices on top of the cooler like microwaves or electric kettles,
and don’ t store your beverage cooler inside pantries.
Make sure there is ample ventilation space surrounding the beverage cooler.
Be careful not to get fingers or dangling accessories caught in the cooler door.
This cooler and its packaging are not intended to be played with or used by children. If a child is using
the cooler, it must be with a dult supervision to avoid injury.
Keep the cooler out of moist, damp or humid environments and situations so as not to damage the
electrical insulation.
Do not use base, cooler door, etc. as pedal or support.
Do not place heavy objects on top of the cooler to prevent accidental damage or injury.
Do not put flammable, explosive, volatile and highly corrosive items in the cooler to prevent damages
to the product or fire accidents.
Do not place flammable items near the cooler to avoid fires.
This product is for household refrigeration appliances, mainly used in the storage of beverage, not for
other purposes, such as storage of blood, drugs and biological products.
Do not cover or close ventilation and exhaust holes.
3
Safety Precautions
PLACEMENT
Before using the cooler, remove all packaging materials including bottom cushions, foam pads, and
tape inside the cooler, tear off the protective film on the door and the cooler body.
Make sure the cooler is placed in a well-ventilated indoor place; on flat, sturdy ground (rotate left or
right to adjust the wheel for levelling if unstable).
The room for cooler should become larger with more refrigerant in cooler, with 8g refrigerant
corresponding to 1m3 spaces. The content standards of refrigerant are labels in name board on
backboard of cooler.
Avoid putting the cooler in direct sunlight or too close to a heat source --keep a safe distance of at
least 30cm between the cooler and a stove or furnace if it can’ t be avoided. We also advise applying
an insulation board in that case.
Keep a circulation space of at least 4cm on both sides of the cooler to preserve power.
Temperature Control
Fan
Shelf
Shelf
Glass Door
Adjustable Foot
Installation
4
Remove the exterior and interior packing.
Before connecting the appliance to the power source, let it stand upright for approximately 24 hours. This will reduce
the possibility of a malfunction in the cooling system from handling during
transportation.
Clean the interior surface with lukewarm water using a soft cloth.
Your beverage refrigerator should be conveniently located for day-to-day use in a dry, well-ventilated room.
Do not install the appliance where the temperature will go below 60°F or above 90°F, because it will not main-tain
proper temperatures. Be sure to install your beverage refrigerator on a floor strong enough to support it when it is
fully loaded.
The appliance is designed for freestanding installation.
WARNING: Do not store or install the appliance outdoors.
CAUTION: This appliance is designed for storing and cooling beverage or wines. Do not store perishable food,
medicine or other medical products.
Place your appliance on a hard and level floor that is strong enough to support it when it is fully loaded.
To level your appliance, adjust the leveling legs at the bottom of the appliance if needed.
Allowance of at least 5 inches (127mm) of space between the back and sides of the appliance are sug- gested,
which allows the proper air circulation to cool the compressor and condenser.
We do not recommend installing the appliance on carpet.
Do not install the appliance near an oven or other heating source. Direct sunlight may affect the acrylic
Coating and heat sources may increase electrical consumption. For best performance, do not install the
appliance behind a cabinet door or block the base grille. Extreme cold ambient temperatures may also cause the
appliance not to perform properly.
Avoid locating the appliance in area that may be exposed to excessive moisture.
Plug in the appliance into an exclusive, grounded wall power outlet. Do not under any circumstances cut or remove
The third (ground) prong from the power cord. Any questions concerning power and/or ground-i ng should be
directed toward a qualified electrician or an authorized service center.
IMPORTANT SAFETY INSTRUCTIONS
INSTALLATION INSTRUCTIONS
To reduce the risk of fire, electrical shock, or injury when
using your appliance, follow these basic pre-cautions:
Read all instructions before using the appliance.
DANGER or WARNING: An empty beverage refrigerator can be a hazardous for children or small pets. If
disposing of the beverage refrigerator, remove gasket seals, latches, lids or the entire door from your unused
appliance, or take other action to ensure the beverage refrigerator is harmless.
Never allow children to operate, play with, or crawl inside the appliance.
Never clean appliance parts with flammable fluids or harsh chemicals. The fumes can create a fire haz-ard
orexplosion.
Do not store or use gasoline or any other flammable vapors and liquids in the vicinity of this or any oth-erappli-
ance. The fumes can create a fire hazard or explosion.
BEFORE USING YOUR APPLIANCE
INSTALLATION OF YOUR APPLIANCE
INSTALLATION LOCATION
Installation
5
A freestanding installation will allow you to install the beverage refrigerator in any place you desire
provided that the req uired clearance space around the appliance is respected. In every setting, there
must be an ad-equate ventilation and a ccess for service. Never install or operate the unit in an
enclosed area, such as a closed cabinet. Allowance of at least 5 inches (127mm) of space between
the back and sides of the appliance are suggested, which allows the proper air circulation to cool the
compressor and condenser.
Improper use of the grounded plug can result in the risk of electrical shock. If the power cord is
damaged, have it replaced by a qualified electrician or contact EUHOMY Service Department.
This appliance requires a standard 115/120 Volt AC ~/60Hz electrical ground outlet with three-prong.
Have the wall outlet and circuit checked by a qualified electrician to make sure the outlet is properly
grounded. The cord should be secured behind appliance and not left exposed or dangling to prevent
accidental injury.
The appliance should always be plugged into its own individual electrical outlet which has a voltage
rat- ing that matches the rating label on the appliance. This provides the best performance and also
prevent overloading house wiring circuits that could cause a fire hazard from overheated. Never
unplug the ap- pliance by pulling the power cord. Always grip the plug firmly and pull straight out from
the receptacle. Repair or replace immediately all power cords that have become frayed or otherwise
damaged.
Do not use a cord that shows cracks or abrasion damage along its length or at either end. When
moving the appliance, be careful not to damage the power cord.
Because of potential safety hazards, it is strongly recommended that you do not use an extension
cord with this appliance. However, if you must use an extension cord, it is absolutely necessary that it
be a UL-Listed, 3-wire grounding type appliance extension cord having a grounding type plug and
outlet and that the electrical rating of the cord be 115 volts and at least 10 amperes.
FREESTANDING INSTALLATION
ELECTRICAL CONNECTION
EXTENSION CORD
Temperature Control
6
The cooler should be placed in a room that is dry and ventilated. The cooler cannot be placed under direct sunlight
or next to heat source (such as a radiator, stove, etc.), and a suitable insulation board must be applied if necessary.
Try to shorten opening time of cooler’ s door.
Avoid putting warm beverages in the cooler.
PROPER USE OF BEVERAGE COOLER
INTRODUCTION TO THE BEVERAGE COOLER’ S FUNCTIONS
Energy Conservation
Display Controls
1.Standby Mode
2.Memory Function
3.Lighting
4.Temperature Setting
5.Fault Indicators
6.INTERNAL FAN
FAULT CODE
E1
E2
DESCRIPTION
R Room sensor failure
R room defrost sensor failure
When turning on for the first time, the display screen will be a full display for 3 seconds and the startup tone will ring.
To activate standby mode, hold the standby button for 3 seconds. You will hear a beep and the display area will be
cut off. To deactivate standby mode, press the button again.You will hear a beep and the standard display will show.
If turned off, this cooler will remember any settings in place and will work according to those settings once it’ s turned
on again.
Press the lighting button to turn the light on or off.
Press the increase temperature button to increase the temperature one degree at a time. Press the decrease
temperature button to decrease the temperature one degree at a time.
If any of these indicators are displayed it means the cooler has the following issues.
This beverage refrigerator is equipped with an internal fan that prevents uneven temperature distribution, ensuring
all of your beverage reaches your desired temperature .
It is recommended you install the appliance in a place where the ambient temperatures is above 60°F (16°C) and
below 90°F (32° C). If the ambient temperature is above or below recommended temperatures, the performance may
be affected. For example, placing your appliance in extreme cold or hot conditions may cause interior temperatures to
fluctuate.
Note:If you want to switch between Celsius and Fahrenheit, press and hold the Drop key and Rise key simultaneously
for 3 seconds, the temperature can be converted.
Placement
7
Tools needed: flathead screwdriver, Phillips screwdriver CAUTION:
Before you begin, unplug the beverage refrigerator from power.
1.sing a flathead screw driver carefully pry the top hinge cover off.
2.Using a Phillips screwdriver, remove the screws and take off top hinge.
1 Keep the parts together and set them aside.
3.Lift the door off the bottom hinge and set the door aside.
4.Remove the bottom hinge by removing the screws with a Phillips head
1 screwdriver.
1.Using a flathead screwdriver, remove the plugs and cover from the opposite cabinet top corner and
1 from the door.
2.Install the bottom hinge at the opposite side corner and fasten the screws.
3.Position the door on the bottom hinge.
4.Align the door on the bottom hinge and install the top hinge.
5.Push the plugs and covers into the corresponding holes.
1.Place a carpenter’ s level on top of the product to see if the beverage refrigerator is level from front to
1 back and side to side.
2.Adjust the height of the feet as follows: Turn the leveling feet
1 to the right to lower that side of the refrigerator. Turn the leveling feet to the left to raise that side of 1
1 the refrigerator.
IMPORTANT: Once you are ready to install, you must adjust the feet to level the beverage refrigerator .
- It is important for the beverage cooler to be leveled in order to
1work properly.
- It can be raised or lowered by rotating each of the feet on the
1botto m of the machine.
- If you find that the surface is not level, rotate the feet until the
1beve rage refrigerator becomes level .You may need to make
1several ad justments to level it. We recommend using a
1carpenter’ s level to c heck the machine.
REVERSING THE DOOR SWING
To remove the door:
To install the door:
LEVELING THE APPLIANCE
Defrosting and Normal Sounds
8
The ice build-up on the inner back wall of your cooler will automatically be defrosted in a comprossor-off
cycle. When you press the button(off),the comprossor and circulation fan stops running.While defrosting is
in process. Defrost water will drain out of the cooler,passing through the drain outlet in the inner back wall
into a drain pan located above the comprossor.The water will evaporate from the drain pan on its own.
The unit is cooled by a compressor. The compressor pumps coolant through the cooling system, producing
operating noise. Even when the compressor cuts out, noises caused by changes in temperature and
pressure are unavoidable. Operating noise will be most audible immediately after the compressor comes
on. It becomes quieter as the operating period continues.
NOTE: An individual’ s perception of noise is directly linked to the environment in which the unit is lo-cated,
as well the specific type of models. Our appliances are in line with international standards for such
appliance and in line with the latest technical developments. Please remember that the noise of the
compressor and the coolant circulating in the system is unavoidable.
- Gurgling sound, caused by the refrigerant flowing through the appliance’s coils,
- Humming noise made by the compressor. This noise can get louder for brief periods when the motor is
1switching on.
- Cracking/popping sounds, resulting from the materials contraction and expansion due to temperature vari-
1ations,Fan operating sound, to circulate the air within the refrigerator cabinet.
DEFROSTING
NORMAL SOUNDS
The following noises are normal and occur from time to time:
Maintenance
9
DISCONNECTING THE BEVERAGE COOLER
CLEANING YOUR BEVERAGE COOLER
FREQUENTLY ASKED QUESTIONS
Unplug the power plug from the socket to disconnect the cooler
Dusting behind the cooler and on the ground will improve the cooling effect and save energy. The interior
of the cooler should be cleaned to avoid any odor. Follow the cleaning procedure below.
I’ m hearing some sounds, what’ s up with that?
Buzzing or any gurgling sound is normal as that can be a result of the unit working properly or refrigerat-
ing fluid flowing through the pipeli ne.
Note: Do not use hard brushes, wire brushes, abrasives, organic solvents, boiling water, acid or
alkaline items as this may damage the cooler surface and interior.
1.Unplug the cooler.
2.Wipe the door seal with warm water.
3.Use soap and warm water to clean the cooler.
4.Reconnect the cooler when the cooler is clean and dry.
Warranty
10
Euhomy offers a limited 1-year warranty (“ warranty period” ) on all of our products purchased new and
unused from Euhomy company, with an original proof of purchase and where a defect has arisen, wholly
or substantially, as a result of faulty manufacture, parts or workmanship during the warranty period. The
warranty does not apply where damage is caused by other factors, including without limitation:
(a) normal wear and tear;
(b) abuse, mishandling, accident, or failure to follow operating instructions;
(c) exposure to liquid or infiltration of foreign particles;
(d) servicing or modifications of the product other than by Euhomy;
(e) commercial or non-household use.
The Euhomy warranty covers all costs related to restoring the proven defective product through repair or
replacement of any defective part and necessary labor so that it conforms to its original specifications. A
replacement product may be provided instead of repairing a defective product. Euhomy’ s exclusive
obligation under this warranty is limited to such repair or replacement. A receipt indicating the purchase
date is requied for any claim, so please keep all receipts in a safe place. Although greatly appreciated, the
product registration is not required to activate any warranty and product registration does not eliminate the
need for the original proof of purchase.The warranty becomes void if attmpts at repair are made by
non-authorized third parties and/or if spare parts, other than those provided by Euhomy, are used.
You may also arrange for service after the warranty expires at an additional cost. These are our general
terms for warranty service, but we always urge our customers to reach out to us with any issue, regardless
of warranty terms. If you have an issue with a Euhomy product, please contact us ([email protected]),
and we will do our best to resolve it for you.
11
Problem Possible Causes Solutions
The appliance does
not operate
The appliance is not
cold enough
The appliance turns
itself on and off
frequently
The appliance makes
too much noise
The door does not
close proper- ly
Condensation builds
up on the glass door.
The appliance is not level
The door was reversed and not
properly installed
The shelves are out of position
Ambient temperature or humidity is
high.
Lower the room humidity by a dehu-
midifier or air conditioner.
Make sure the appliance is on a hard
and level surface. Avoid placing the
appliance on a carpeted or soft surface
Reinstall door
Correctly install the shelves
There is a power failure
The appliance is not plugged in
A house fuse has blown or the
1circuit breaker is tripped
The appliance is placed too close to
a heat source
The door is opened too often
The door is not closed completely
The door gasket does not seal
properly
The ambient (room) temperature is
too low or high
A large amount of contents has been
added to the appliance
The door is opened too often
The door is not closed completely
The door gasket does not seal
properly
The noise may come from the flow of
the refrigerant and expan- sion of the
inside walls may cause popping and
crackling noises
Contraction and expansion of the
inside walls may cause popping and
crackling noises
The appliance is not level
It is normal that as each cooling cycle
ends, you may hear rattling or gurgling
sounds caused by the flow of refriger- ant
in the appliance. The high efficien- cy
compressor may make a pulsating or high
pitched sound
Some popping or cracking noises are
normal. They are caused by expansion and
contraction of the inside walls due to
temperature changes
Make sure the unit is on a hard and
level surface. Do not place the appli- ance
on carpet
See Normal Sounds
Decrease or increase the ambient
(room) temperature
To minimize internal temperature
fluc- tuation, do not add large
amount of contents at once
Close the door tightly and do not
open the door too frequently or for a
long period of time
Ensure the door gasket is not loose
It is normal for the fan come on and
off to circulate the air inside of the
unit for even temperature distribution
and to save energy
Adjust the temperature
Keep the appliance away from sun-
shine or other heat sources
Close the door tightly and do not
open the door too frequently or for a
long period of time
Ensure the door gasket is not loose.
Ensure the appliance is plugged in
and the power outlet has power
Replace the broken fuse or reset the
breaker
:
:
:
Thank you for selecting our quality appliance. Please be sure to read this user manual
carefully before using. Any question, please contact the professional service for help.
Euhomy
Sucan me
Like us
