Loading ...
Loading ...
Loading ...
Placement
7
Tools needed: flathead screwdriver, Phillips screwdriver CAUTION:
Before you begin, unplug the beverage refrigerator from power.
1.sing a flathead screw driver carefully pry the top hinge cover off.
2.Using a Phillips screwdriver, remove the screws and take off top hinge.
1 Keep the parts together and set them aside.
3.Lift the door off the bottom hinge and set the door aside.
4.Remove the bottom hinge by removing the screws with a Phillips head
1 screwdriver.
1.Using a flathead screwdriver, remove the plugs and cover from the opposite cabinet top corner and
1 from the door.
2.Install the bottom hinge at the opposite side corner and fasten the screws.
3.Position the door on the bottom hinge.
4.Align the door on the bottom hinge and install the top hinge.
5.Push the plugs and covers into the corresponding holes.
1.Place a carpenter’ s level on top of the product to see if the beverage refrigerator is level from front to
1 back and side to side.
2.Adjust the height of the feet as follows: Turn the leveling feet
1 to the right to lower that side of the refrigerator. Turn the leveling feet to the left to raise that side of 1
1 the refrigerator.
IMPORTANT: Once you are ready to install, you must adjust the feet to level the beverage refrigerator .
- It is important for the beverage cooler to be leveled in order to
1work properly.
- It can be raised or lowered by rotating each of the feet on the
1botto m of the machine.
- If you find that the surface is not level, rotate the feet until the
1beve rage refrigerator becomes level .You may need to make
1several ad justments to level it. We recommend using a
1carpenter’ s level to c heck the machine.
REVERSING THE DOOR SWING
To remove the door:
To install the door:
LEVELING THE APPLIANCE
Loading ...
Loading ...
Loading ...