Slim Light Features:
Motion/Light Sensor: Light instantly turns on when it
detects motion from up to 7 feet away. The light sensor
conserves battey life by preventing the light from
activating in daylight.
Auto Shut-o: Light shuts o automatically after 20 or 60
seconds (optional) if no motion is detected.
Bright LED: 35 Lumens covers up to 10 sq ft.
32333 Aurora Rd. Suite 100 Solon, OH 44139
877.298.9082
Installation Instructions
Wireless Motion Sensor LED Slim Light
MB852-862
• 4 AA-Cell Alkaline Batteries
• Screwdriver
• 2 Slim Lights
• 4 Screws & 2 Strips of Double Sided Tape
• 2 Mounting Brackets
Motion &
Light Sensor
Mounting Bracket Motion Sensor Sticker
LED Light
NOTE: Light sensor only allows Slim Light to activate in darkness. We recommend you test in a dark room or closet.
What you need to install:
Thank you for purchasing the Mr Beams
®
Slim Light. We are committed to eliminating
darkness using the latest in Light-Emitting Diodes
(LEDs). LEDs are the most ecient and durable
light sources available. We are certain that your
light will contribute to a safer environment and
provide light where you need it at a very
reasonable cost.
What is included per light:
www.mrbeams.com
1. Remove rear cover of light by placing two
ngers on the circle on the face of the light and
placing your thumbs on each side of the back of
the light, lightly push down and slide toward the
arrows on mounting bracket.
2. Set auto shut-o to 20 or 60
seconds. For extended battery life,
20 seconds is recommended.
5. Locate the motion sensor sticker.
Sticker will help optimize battery life
and acts as a light sensor.
6. Peel the yellow paper o motion
sensor sticker.
7. Apply sticker with hole centered
over motion sensor lens.
8. Turn the light so the motion
sensor lens is positioned closest to
walkway/front of cabinet. The best
location is as far away from walkway
/front of cabinet, while still
illuminating target surface space.
3. Insert 4 AA-Cell batteries into Slim Lights. Lights should come
on immediately. Do not replace cover.
4. Drive screws (included) through holes of mounting bracket to
secure.
Tips:
•
Use only new alkaline AA-Cell batteries with 1.5V rating.
•
Do not mix old and new batteries. If batteries are not new, it may cause the light to malfunction.
•
Install batteries with polarity in correct position.
•
Light may activate when batteries are inserted. Simply take light into a dark room. Allow
motion sensor to settle, then test activation.
•
If your light is activating by motion too often, reposition light further away from trac.
Batteries will drain if this keeps occurring.
•
If your light will not turn o, it means that it is time to replace the batteries.
•
NOTE: This is a strong adhesive tape that may cause damage to paint,
wallpaper, or surface underneath if removed.
* 1 year limited warranty. Visit site for details.
* Visit our website to view installation video.
Battery Caution:
1) Do not mix old and new batteries
2) Do not mix Alkaline, Standard (Carbon-Zinc) or Rechargeable (Nickel Cadmium)
or (Nickel Metal Hydride) batteries
3) Do not dispose of batteries in re
4)Batteries should be recycled or disposed of as per state and local guidelines
