Loading ...
Loading ...
Loading ...
If you desire to deactivate the sound on the keypad you can follow the steps below.
Enter # 5 # on the keypad to turn off the sound. Re-enter # 5 # to turn the sound back on.
Note: If when entering your code or programming a new user code you do not hear the key beep, enter
# 5 # to activate the sound.
This safe is equipped with a motion sensor alarm that detects sudden jolts, violent shaking and
vibrations. If you want to use the alarm feature, you must activate it by following the steps below.
There are three levels of sensitivity to choose from:
Low Sensitivity
Medium Sensitivity
High Sensitivity
Turn Off Alarm
Setting the motion alarm
1. Open door
2. Press the reset button and press one of the following options for alarm loudness:
- Low: #1#
- Medium: #2#
- High: #3#
- To turn off the alarm press #0#
3. Your desired alarm settings will be active after the battery lights on the LED go on then off.
Note: You can record your new user code on the “Digital User Code Record” section on page 9 and then
keep this manual in a secure location away from the safe.
LOCKING AND UNLOCKING THE SAFE
TURN SOUND ON AND OFF
MOTION ALARM SETTINGS
Figure 1 Figure 2
1. Close the safe door and turn handle downward to the left placing the door bolts into
the locked position (Figure 1 and Figure 2).
Note: Due to the airtight seal, to close you may have to push inward on the door while turning the
handle downward clockwise to place the blots fully into the locked position.
2. Safe will automatically lock after 5 seconds.
3. Check to ensure safe is locked by attempting to turn the handle to the unlocked position.
5
Figure 3
Loading ...
Loading ...
Loading ...