Loading ...
Loading ...
Loading ...
3. Adjust the handlebar to put the product in a good
operation position.
4. Tighten the knob fully.
To put the handlebar in transport
position
1. Loosen the knob.
2. Turn the handlebar until it is parallel to the shaft.
3. Turn the handlebar around the shaft.
4. Tighten the knob.
To assemble the cutting equipment
The cutting equipment includes a cutting attachment and
a cutting attachment guard.
WARNING: Use protective gloves.
WARNING: Always use the cutting
attachment guard that is recommended for
the cutting attachment. See
Accessories on
page 28
.
WARNING: An incorrectly attached cutting
attachment can result in injury or death.
Cutting equipment and guards
The product have different cutting attachment guards for
the cutting equipment that can be used. Make sure that
you use the correct cutting attachment guard for the
cutting equipment. Refer to
Technical data on page 27
.
• Grass blade guard and grass blade.
• Trimmer guard and trimmer head.
• Saw blade guard and saw blade.
Assembly of the grass blade guard and the
grass blade
To attach the grass blade guard
• Put the grass blade guard (A) onto the shaft and
tighten the bolt.
A
12
609 - 002 - 27.06.2019
Loading ...
Loading ...
Loading ...