Loading ...
Loading ...
Loading ...
6. If the codes are not cleared, then an “ERASE FAIL!” message will
appear. Press the ENTER button to Return to the main Menu list.
HOT KEY:
Pressing and Holding the SCROLL button for about 3 seconds
will allow you to erase the DTCs more quickly than through the main menu.
Retrieving I/M Readiness Status
IMPORTANT:
I/M Readiness function is used to check the operations of
the Emission System on OBD2 compliant vehicles. It is an excellent
function to use prior to having a vehicle inspected for compliance to a
state emissions program.
An I/M Readiness Status result of “NO” does not necessarily indicate that
the vehicle being tested will fail the state I/M inspection. For some states,
one or more such monitors may be allowed to be “Not Ready” to pass the
emissions inspection.
• “YES”--All monitors supported on the vehicle have completed their
diagnostic testing and the MIL light is not on
• “NO”--At least one monitor supported on the vehicle has not completed its
diagnostic testing, and (or) the “Check Engine”( MIL) light is on
• “READY”—Indicates that a particular monitor being checked has
completed its diagnostic testing
• “Not RDY(NOT READY)”—Indicates that a particular monitor being
checked has not completed its diagnostic testing.
• “N/A”—The monitor is not supported on that vehicle
• “
”-- A flashing Right Arrow indicates additional information is available
on the next screen
• “˿
_
”-- A flashing Left Arrow indicates additional information is
available on the previous screen
ERASE
FAIL!
15
Loading ...
Loading ...
Loading ...