Loading ...
Loading ...
Loading ...
Ice & Water Dispenser (continued)
To Dispense Ice and Water
• Set the selector switch to CUBES, CRUSHED ICE
(on some models) or WATER.
° Grip the glass or other container near the rim and press
the rim against the center of the pad
When Dispensing Ice:
• Same crushed ice may be
dispensed even though you selected
CUBES_This happens occasionally
when a few cubes get channeled to
the crusher
° Sometimes a mound of snow will
form on the door in the ice chute.
Th_scondition is normal, and usually occurs when you have
dispensed crushed ice repeatedly. The snow will eventually
evaporate.
• Sometimes crushed ice will spray beyond the glass To
avoid this, hold the glass up close to lhe chute_
When Dispensing Water:
• The first glass of water dispensed
may be warmer than the following
ones._Thisis normal
• Dispensedwater is cool, not iced
Forcolder water, simply add crushed
ice or cubes before dispensing water.
CAUTION: Never put fingers or other
objects into the dispenser opening
To Stop Dispensing
Release pressurefrom the pod and
waita few seconds to catch the last
bits of ice or drops of water_ There
may be some dripping after
dispensing of crushed ice or water.
Ifthere is a lot of dripping, the spill
should be wiped dry right away
Do not pour water in the spill shelf
because it is not self draining-pour it in the
kitchen sink.The shelfand its grille should be
cleaned regularly according to
Care and Cleaning instructions°
The grille is easily removed by
pressing on t_e back right corner
Press here to
remove gfilre
If )ce Clumps Form in the Storage Bin.,.
The icemaker ejects cubes in groups of eight, and it is
normal for several cubes to be joined together However,
if you don't use the ice very often ice clumps may form in
the storage bin and can clog the dispenser If this happens:
° Remove the storage bin from the freezer.
,, Break up ice clumps with your hands Throw away any
clumps that you can't break up.
° Replace the bin before the remaining cubes melt and
fuse together
• After washing the bin, allow it to cool before replacing it,
otherwise ice will stick to the metal auger.
To Remove )ce Storage Bin
Liftthe left corner to free the bin from
the shelf. Pullthe bin straight out while
supporting it at front and back..
To Replace Ice Storage Bin _,
Slide the bin back until the tab on the
bin locks into the slot in the shelf
IFthe bin does not go all the way back,
remove it and turn the drive mechanism
1/4 turn Then push the bin back again
until the tab on the bin locks into the slot in the shelf.
10
Loading ...
Loading ...
Loading ...