Tripp Lite OMNIVS800LCD Owner's Manual

Loading ...

Quick Installation

Optional Installation

All models include a USB communication port

and tel/DSL/Ethernet surge protection jacks (not

compatible with PoE applications). Select models

will also include an RS-232 serial port. These

connections are optional, as the UPS will work

properly without these connections.

Basic Operation

UPS ON/OFF

• Plug the UPS into a live, grounded outlet.

The entire LCD screen will illuminate for 5 seconds, then the display will report output

voltage of “0V”. The BATTERY / SURGE PROTECTED outlets will be OFF and the SURGE

ONLY outlets will be ON. The battery charger will engage as necessary.

• Plug equipment into the UPS: You will overload the UPS if the total volt-amp (VA) ratings

for all the equipment connected to the BATTERY/SURGE PROTECTED outlets exceed the

UPS output capacity. To ﬁnd your equipment’s VA ratings, look on their nameplates. If the

equipment is listed in amps (A), multiply the number of amps by 120 to determine VA. For

example: 1A × 120 = 120VA.

• Turn the UPS on: Press and hold the power button until the alarm begins to sound, then

release. The UPS alarm will beep once brieﬂy. The BATTERY/SURGE PROTECTED outlets

will begin passing AC line power. The UPS will automatically recharge internal batteries

as needed. Once turned on, your UPS is ready to protect connected equipment from

blackouts, brownouts, overvoltages and transient surges.

• Turn the UPS off: Press the power button.

Note: UPS system will function properly upon initial startup; however, maximum runtime for the unit’s

battery will only be accessible after it has been charged for 24 hours.

21-10-017-9338D9-Book.indb 521-10-017-9338D9-Book.indb 5 10/15/2021 2:45:53 PM10/15/2021 2:45:53 PM

Loading ...

Tripp Lite OMNIVS800LCD 800VA 475W Line-Interactive UPS - 8 NEMA 5-15R Outlets, AVR, 120V, 50/60 Hz, USB, LCD, Tower