Loading ...
Loading ...
Loading ...
56V LITHIUM-ION CORDLESS SNOW BLOWER — SNT2120AP/SNT2120AP-FC 29
6. Insert the 5 bolts into the mounting
holes from the inside, shiny surface
of the scraper bar (Fig. 23a). Place
the spring washers and nuts on the
bolts (from the outside of the deck)
and securely fasten the scraper bar
to the deck (Fig. 23b).
REPLACING THE RUBBER
PADDLES & RUBBER AUGERS
(Fig. 24)
If the rubber paddles and rubber augers
become worn, excessively cracked,
frayed, or otherwise damaged, replace
them.
WARNING: Make sure to turn off the
unit and remove the battery pack(s) before
performing any maintenance task on your
snow blower.
To replace the rubber paddles:
(Fig. 24a)
Required tools (not included):
◾
Flat head screwdriver
◾
13/32” (10 mm) open-end wrench
1. Wear gloves. Manually rotate the
steel auger to the appropriate
position for easy rubber paddle
disassembly.
2. Remove all securing bolts and nuts
to take the rubber paddles out.
3. Replace them with the new rubber
paddles, and securely tighten them.
23b
Bolt
Nut
Spring washer
Deck
Scraper bar
23a
Bolt
Nut
Spring Washer
Scraper Bar
24
Rubber Auger
Rubber Paddle
24a
2 sets of bolts and nuts on
each paddle (total of 4 sets)
Loading ...
Loading ...
Loading ...