Loading ...
Loading ...
Loading ...
ENGLISH-26
Symptom Checklist
"Filter inspection indicator" is
on even after the dustbin has
been emptied.
fUse POWERbot after turning off the emergency switch and then
turning it back on.
fEmpty the dustbin again and re-clean the filter thoroughly.
The POWERbot passes
through the Virtual guard.
fIf the batteries are depleted, replace them. (2 type D (LR20) batteries)
fIf the lamp is off, check if the Virtual guard is turned off and turn it on.
The battery usage time of the
Virtual guard is too short.
fCheck if you're using manganese drycell batteries and replace the
batteries with new ones. (2 type D (LR20) batteries)
POWERbot moves around at
the same place.
fCheck if Dust sensor mode is on.
– When POWERbot passes on a dusty area with Dust sensor mode
on, it moves around that area to focus on cleaning. (Dust sensor
mode can be turned on or off by the remote control. However, it will
operate again if you turn off the emergency switch and then turn it
back on.)
fPOWERbot moves around an area and the "DUST" is on the display
panel even though there's no dust at the surrounding area.
– Check if foreign matters are caught between the dustbin and power
brush and then remove them.
Troubleshooting
2015-02-05 오후 3:06:40
Loading ...
Loading ...
Loading ...