Samsung VR20H9050UW/EU Vr9000 Robot Vc With Cyclone Force, 70 Watt

User Manual - Page 25

For VR20H9050UW/EU. Series: SR20H9050U Series
Also, The document are for others Samsung models: VR20H9050UW

PDF File Manual, 152 pages, Read Online | Download pdf file

VR20H9050UW/EU photo
Loading ...
Loading ...
Loading ...
ENGLISH-25
Troubleshooting
Symptom Checklist
The POWERbot is not working
at all.
fCheck if the emergency switch is on.
fCheck if all the icons are displayed on display panel.
fCheck if the battery of POWERbot is depleted.
When "Lo" is displayed, carry POWERbot to the charger to charge it.
fReplace the batteries (AAA type) when the remote controller is not
working.
The POWERbot is stopped
during cleaning process.
fWhen "Lo" is displayed on the display panel, carry POWERbot to the
charger to charge it.
fWhen POWERbot is stuck by the obstacles such as cord, threshold
etc, pick it up to remove it from the obstacle.
If any fabrics or strings are caught in the drive wheel, turn off the
emergency switch and remove the fabrics or strings before using it
again.
Suction power is weak.
fIf the "Filter inspection indicator" is on, turn off the emergency switch
and clean the dustbin.
fWhen there's too much dust in the dustbin, suction power may get
weakened. Turn off the emergency switch and empty the dustbin.
fIf the intake (on bottom of POWERbot) is blocked by foreign matters,
turn off the emergency switch and remove foreign matter from the
intake.
fWhen noise suddenly increase, turn off the emergency switch and
empty the dustbin.
The POWERbot cannot find
the charger.
fCheck if there's power failure or whether the power plug is unplugged.
fRemove any obstacles around the charger that may disturb
POWERbot from returning to the charger.
fWhen there's foreign matters on the charge pins that affects charging,
clean the foreign matter.
The POWERbot suddenly
cleans diagonally.
fCheck if the charger is installed along the grain of wooden floors or
tiles.
fIt may clean in diagonal direction for moving to another area in shortest
route, or it made contact with any obstacles in that angle, or if it was
charged at the charged at an angle, or grain of the wooden/tile floor is
in that direction.
Point cleaning is not working.
fIf you point the red light directly on POWERbot, it may not move to
desired direction.
Point the red light on the floor within 50 cm around POWERbot.
Do not use the point cleaning under direct sunlight, bright light or on
dark floors.
2015-02-05 오후 3:06:40
Loading ...
Loading ...
Loading ...