Loading ...
Loading ...
Loading ...
1) Use SCROLL button to select I/M Readiness from
Diagnostic Menu and press ENTER/EXIT.
• If more than one module is detected, you will
be prompted to select a module before test.
• Use the SCROLL button to select a module,
and press ENTER/EXIT button.
2) Wait a few seconds while the code reader
validates the PID MAP.
3) If the vehicle supports both types of tests,
then both types shows on the screen for selection.
4) Use SCROLL button to view the status of the
MIL light (“ON” or “OFF”) and the following monitors:
Misfire monitor - Misfire monitor
Fuel System Mon - Fuel System Monitor
Comp. Component - Comprehensive Components Monitor
EGR - EGR System Monitor
Oxygen Sens Mon - O2 Sensors Monitor
Catalyst Mon - Catalyst Monitor
EVAP System Mon - Evaporative System Monitor
Oxygen Sens htr - O2 Sensor Heater Monitor
Sec Air System - Secondary Air Monitor
Htd Catalyst - Heated Catalyst Monitor
A/C Refrig Mon - A/C system Monitor
5) If the vehicle supports readiness test of
This Drive Cycle”, a screen of the following
will be displayed:
• The number in the upper right corner of the
screen indicates total number of screens the
retrieved data cover and sequence of currently
displayed data.
6)
Press ENTER/EXIT button to return to previous menu.
Viewing Vehicle Information
The Vehicle Info. function enables retrieval of the Vehicle Identification No. (VIN),
Calibration ID(s), Calibration Verification Nos. (CVNs) and In-use Performance
Tracking on 2000 and newer vehicles that support Mode 9.
============================4/6
1) Read Codes
2) Erase Codes
3) View Freeze Frame
u 4) I/M Readiness
Diagnostic Menu
============================1/3
u Engine
Module $A4
Exit
Control Module
==============================
Reading PID...
- Please Wait -
I/M Readiness
============================1/3
u Since DTCs Cleared
This Drive Cycle
Exit
I/M Readiness
============================1/3
MIL Status OFF
Misfire Monitor OK
Fuel System Mon OK
Comp. Component OK
Since DTCs Cleared
============================1/3
MIL Status ON
Misfire Monitor OK
Fuel System Mon OK
Comp. Component OK
This Drive Cycle
14
Loading ...
Loading ...
Loading ...