Loading ...
Loading ...
Loading ...
BACK
47.24
"
(120 cm)
Max.
GROUNDING REQUIREMENTS
Improper connection of the equipment grounding conductor can result in a
risk of electrical shock. Check with a licensed electrician if you are in doubt
as to whether the appliance is properly grounded.
1. The washer MUST be grounded. In the event of malfunction or breakdown,
grounding will reduce the risk of electrical shock by providing a path of
least resistance for electrical current.
2. Since your washer is equipped with a power supply cord having an
equipment-grounding conductor and a grounding plug, the plug MUST
be plugged into an appropriate, copper-wired receptacle that is properly
installed and grounded in accordance with all local codes. If in doubt, call
a licensed electrician. DO NOT cut off or alter the grounding prong on the
power supply cord. In situations where a two-slot receptacle is present, it
is the owner’s responsibility to have a licensed electrician replace it with
a properly grounded grounding-type receptacle.
WATER SUPPLY REQUIREMENTS
Hot and cold water faucet MUST be installed within 42" (107 cm) of your
washer’s water inlet. The faucet MUST be 3/4" (1.9 cm) garden hose-type
so inlet hoses can be connected. Water pressure MUST be between 10 and
120psi. Your water department can advise you of your water pressure.
DRAIN REQUIREMENTS
1. Drain capable of eliminating 64.3 L per minute.
2. A standpipe diameter of 1-
1/4" (3.18 cm) minimum.
3. The standpipe height above the floor should be:
Minimum height: 24" (61 cm)
Maximum height: 47.24" (120 cm)
7
24"
(61 cm)
Min.
Washer
Safety
Operation
Requirements
Installation
Instructions
Troubleshooting
Washer Care
Washer Use
Loading ...
Loading ...
Loading ...