Loading ...
Loading ...
Loading ...
29
Washer
Safety
Operation
Requirements
Installation
Instructions
Troubleshooting
Washer Care
Washer Use
Problem Possible Cause What To Do
Leaking water
(cont.)
Fill hoses or drain hose is
improperly connected
• Make sure hose
connections are tight at
washer and faucets and
make sure end of drain
hose is correctly inserted
in and secured to drain
facility.
Household drain may be
clogged
• Check household
plumbing. You may need
to call a plumber.
Dispenser clogged
• Powder soap may cause
clogs inside the dispenser
and cause water to
leak out the front of
the dispenser. Remove
drawer and clean both
drawer and inside of
dispenser box. Please
refer to Cleaning the
Washer section.
Incorrect use of detergent
• Use HE and correct
amount of detergent.
Dispenser box crack
• If new installation, check
for crack on inside of
dispenser box.
Clothes too
wet
Load is out of balance
Pump clogged
Overloading
Drain hose is kinked or
improperly connected
• Redistributes clothes and
run drain & spin or rinse
& spin.
• Increase load size if
washing small load
containing heavy and
light items.
• The machine will slow the
spin speed down to 400
rpm if it has a hard time
balancing the load. This
speed is normal.
• See page 25 on how to
clean the Pump Filter.
• The dry weight of the
load should be less than
18 lbs.
• Straighten drain hose and
make sure washer is not
sitting on it.
Loading ...
Loading ...
Loading ...