Loading ...
Loading ...
Loading ...
en Familiarising yourself with your appliance
6
If the cooking time is relatively long, you can switch
the appliance off 10minutes before the cooking time
ends.
¡
There will be enough residual heat to finish cooking
the dish.
Remove any accessories that are not being used from
the cooking compartment.
¡
Accessories that are not being used do not need to
be heated.
Allow frozen food to defrost before cooking.
¡
This saves the energy that would otherwise be re-
quired to defrost it.
Switch off the display in the basic settings.
→"Basic settings", Page19
¡
Energy is saved when the display is switched off.
Note:
The appliance requires:
¡ A maximum of2W in networked standby mode
¡ A maximum of 0.5W in non-networked standby
mode with the display switched off
4 Familiarising yourself with your appliance
4.1 Control panel
You can use the control panel to configure all functions
of your appliance and to obtain information about the
operating status.
On certain models, specific details such as colour and
shape may differ from those pictured.
1
2 2
1
Display with setting ring
You can use the digital setting ring to set the
appliance via the display.
You will see the current setting values, options
or relevant information.
→"Display", Page6
2
Buttons
You can use the buttons to directly set various
functions.
→"Buttons", Page6
4.2 Buttons
You can use the buttons to directly select various func-
tions.
Button Function
Switch the appliance on or off.
→"Basic operation", Page11
Open the "Operating modes" menu.
→"Operating modes", Page7
Button Function
Start or pause operation.
→"Basic operation", Page11
Display for HomeConnect. The field
has no further function.
When the symbol lights up, the appli-
ance is connected.
→"HomeConnect ", Page20
4.3 Display
The display is divided into different areas.
Digital setting ring
You can use the digital setting ring on the display to
change the setting values.
When you reach the minimum or maximum value avail-
able, this value remains on the display. If required, use
the setting ring to turn the value back again.
Finely tuned setting values
To fine-tune the setting values, e.g. to set a time to the
precise minute, press and hold the corresponding area
in the setting ring for around 1-2 seconds. The finely
tined setting values are shown in dots.
Status indicator
Status information is shown at the top of the display.
Symbol Meaning
Timer is activated.
→"Setting the timer", Page13
Childproof lock is activated.
→"Childproof lock", Page18
The appliance door is locked due to the
cleaning function or childproof lock.
→"Pyrolytic activeClean cleaning func-
tion", Page23
→"Basic settings", Page19
WiFi signal strength for HomeConnect.
The more lines of the symbol are filled,
the better the signal.
If the symbol is struck through , there
is no WiFi signal.
If there is an "x" at the symbol , there
is no connection to the HomeConnect
server.
→"HomeConnect ", Page20
Loading ...
Loading ...
Loading ...