Loading ...
Loading ...
Loading ...
5
NOTE:
It is most important that this Electric Range Static / Convection Oven is installed correctly
and that operation is correct before use. Installation shall comply with local electrical and
health and safety requirements.
This appliance shall be installed with sufficient ventilation to prevent the occurrence of
unacceptable concentrations of health harmful substances in the room, the appliance is
installed in.
Waldorf Electric Range Static / Convection Oven are designed to provide years of satisfactory service, and
correct installation is essential to achieve the best performance, efficiency and trouble-free operation.
This appliance must be installed in accordance with National Installation Codes and in addition, in
accordance with relevant National / Local codes covering electrical and fire safety.
Australia / New Zealand: - AS / NZS3000 - Wiring Rules.
United Kingdom: - BS 7671 - Requirements for Electrical Installations.
Installations must be carried out by authorised persons only. Failure to install equipment to
the relevant codes and manufacturer’s specifications shown in this section will void the
warranty.
1. Remove all packaging and transit protection from the appliance including all protective plastic
coating from the exterior stainless steel panels.
2. Check equipment and parts for damage. Report any damage immediately to the carrier and
distributor.
3. Report any deficiencies to the distributor who supplied the appliance.
4. Check that the available electrical supply is correct to that shown on the lower right hand front sill
panel.
1. Installation must include adequate clearance and ventilation.
2. Position the appliance in its approximate working position.
3. The legs must always be fitted. Ensure that the legs are securely attached.
NOTE: Only non-combustible materials can be used in close proximity to this appliance.
Left / Right hand side 250mm 0mm
Rear 50mm 0mm
Loading ...
Loading ...
Loading ...