Waldorf Bold RNLB8610EC 900mm Electric Range Convection Oven Low Back Version

Installation Operation Manual - Page 14

For RNLB8610EC. Series: 800 SERIES
Also, The document are for others Waldorf models: RN8610E, RNL8610E, RNB8610E, RNLB8610E, RN8610EC, RNL8610EC, RNB8610EC

PDF File Manual, 25 pages, Read Online | Download pdf file

RNLB8610EC photo
Loading ...
Loading ...
Loading ...
12
Clean the range regularly. A clean appliance looks better, will last longer and will perform better.
Carbonised grease on the surface or on the griddle plate (If fitted) will hinder the transfer of heat
from the cooking surface to the food. This will result in loss of cooking efficiency.
NOTE: Each griddle option can be supplied with a scraper tool and a pack of blades for cleaning
the griddle surface. These are not supplied with the griddle and have to be purchased
separately. Refer to the 'Replacement Parts List' at the rear of this manual.
DO NOT use water on the griddle plate while this item is still hot as warping and cracking
may occur. Allow the griddle plate to cool down before cleaning.
NOTE:
DO NOT use abrasive detergents, strong solvents or caustic detergents as they could
corrode or damage the range.
In order to prevent the forming of rust on the griddle plate (Steel Plate), ensure that any
detergent or cleaning material has been completely removed after each cleaning. The
appliance should be switched on briefly to ensure the griddle plate becomes dry. Oil or
grease should be spread over the griddle surface in order to form a thin protective greasy
film.
To keep your range clean and operating at peak efficiency, follow the procedures shown below:-
1. Clean the griddle with a scraper tool to remove any food debris.
2. Always ensure that the scraper tool blades are changed regularly to ensure that the scraper tool
works efficiently and prevents damage to the griddle plate surface.
Radiant Elements
a. Wipe the surface while the radiant elements are still warm to remove overspills, grease etc.
before they harden.
b. As soon as elements have cooled, wipe all over with a damp cloth.
c. Raise the side of the element module and withdraw, clean and dry the spill-over dish.
Always turn off the electrical power supply at the mains supply before cleaning.
This appliance is not water proof.
Do not use water jet spray to clean interior or exterior of this appliance.
THE BLADES FITTED TO THE SCRAPER TOOL ARE EXTREMELY SHARP AND ARE TO BE USED WITH CARE.
Loading ...
Loading ...
Loading ...