Waldorf Bold RNLB8610EC 900mm Electric Range Convection Oven Low Back Version

Installation Operation Manual - Page 15

For RNLB8610EC. Series: 800 SERIES
Also, The document are for others Waldorf models: RN8610E, RNL8610E, RNB8610E, RNLB8610E, RN8610EC, RNL8610EC, RNB8610EC

PDF File Manual, 25 pages, Read Online | Download pdf file

RNLB8610EC photo
Loading ...
Loading ...
Loading ...
13
1. The grease drawer should be checked and
emptied frequently to prevent overflow and
spillage. Remove the grease drawer while still
warm so that the grease is in a liquid state.
Empty any grease from the drawer and wash
thoroughly in the same manner as any cooking
utensil.
2. Thoroughly clean the splash back, the interior
and exterior surfaces of the range with hot
water, a detergent solution and a soft scrubbing
brush.
3. Clean the Control Panel with a damp cloth light-
ly moistened with a solution of mild detergent
and water. Dry the control panel thoroughly
with a dry cloth and polish with a soft dry cloth.
4. Brush the griddle surface (optional - if fitted)
with a soft bristled brush. Any carbon deposits
should be removed using the supplied scraper
tool followed by wiping with a cloth to prevent
accumulation of food deposits.
5. Brush the elements with a soft bristled brush.
Any carbon deposits should be removed using a
scraper tool followed by wiping with a cloth
moistened in a solution of hot water and
detergent to prevent accumulation of food
deposits.
6. To clean under the elements, carry out the
following procedure as shown opposite:-
A. Lift up the element module at the front of
the cooktop.
B. Whilst holding up the front of the element
module, pull the module as far forward as it
will come.
C. Rotate the element module around the
element pivot plate on whichever side of the
cooktop that the pivot plate is located.
D. Remove the drip tray from beneath the
element and wash with hot water and a
detergent solution. Dry with a soft dry
cloth.
Clean beneath the element using a cloth
moistened in a solution of hot water and
detergent.
Refit the drip tray beneath the element
ensuring that the drip tray is fitted correctly.
Lower the element module back down to the
cooktop frame and slide rearwards to fit
back into position on the cooktop surface.
7. Dry the range thoroughly with a dry cloth and
polish with a soft dry cloth.
Lift up Front of
Element Module
Pull Element
Module Forwards
Rotate Element
Support Element and
Lift Out Drip Tray
L/Hand Element
Pivot Plate
R/Hand Element
Pivot Plate
A
B
C
D
Loading ...
Loading ...
Loading ...