Loading ...
Loading ...
Loading ...
Installation
English28
English
C
B
4. Reconnect the cut portion of the duct
(C), and then fasten it to the ramp on
the appliance base with the screw (B)
which you set aside in Step 2.
D
D
C
5. Insert the elbow (D) through the rear
hole and connect it to the duct (C).
6. Rotate the elbow (D) through the
bottom opening.
CAUTION
Do not to pull or damage the electrical
wires inside the dryer when inserting the
duct.
E
7. Apply duct tape (E) on the joint as
shown.
CAUTION
All joints must be secured with duct tape,
otherwise, they may separate and cause a
safety hazard.
DV6900B_LED_WEB_Vent_EN.indd 28 2022/5/13 15:28:40
Loading ...
Loading ...
Loading ...